Carver 38 super sport, Руководство пользователя

Страница: 52 / 162

DC E
LECTRICAL
S
YSTEM
3827 10/04
S
ECTION
2
2.2.3.15 Plotter
This breaker controls the flow of electricity to the optional chart plotter.
To supply power to this system, switch this breaker “ON.” Refer to the
OEM information for details on operating the chart plotter.
2.2.3.16 Depth Sounder
This breaker controls the flow of electricity to the optional depth
sounder. To supply power to this system, switch this breaker “ON.” Refer
to the OEM information for details on operating the depth sounder.
2.2.3.17 Auto Pilot
This breaker controls the flow of electricity to the optional automatic
piloting system. To supply power to the auto pilot, switch this breaker
“ON.” Refer to the OEM information for details on operating the auto
pilot.
2.3 Battery Maintenance
The batteries contain electrolyte which is an acid. Wear gloves and
protective eyewear when working on and around the batteries.
When servicing the batteries avoid spilling electrolyte into the engine
room or bilge. Also, avoid getting any salt water in or on the battery.
Either of these conditions can create a poisonous gas that is harmful if
inhaled.
If you spill electrolyte:
1. Ventilate the area of the spill.
2. Neutralize the acid in the electrolyte by pouring baking soda on the
spill.
3. Remove the neutralized electrolyte using a disposable rag or paper
towel.
While the batteries are relatively maintenance-free, there are a few
things you can do to increase their effectiveness and life:
• Keep your batteries fully charged. Batteries that are kept fully or
near fully charged last longer than batteries stored with a partial
charge. The charge level of the batteries can be monitored using the
voltmeters on the helm instrument panel.