Carver 38 super sport, Руководство пользователя

Страница: 81 / 162

3827 10/04
I
NTERNAL
S
YSTEMS
S
ECTION
4
overboard or into an optional grey water holding tank. When the Auto
Sump circuit breaker on the Safety Breaker Panel is “ON,” the sump
pump operates automatically when water in the sump rises above a
predetermined level.
NOTE: The sump pump can not operate if the Auto Sump circuit breaker
is “OFF.” Verify that the circuit breaker is “ON” before using the shower or
sinks.
A T
IP
F
ROM
C
ARVER
!
To obtain the most consistent shower temperature, turn on the cold water faucet
fully, then slowly turn on the hot water faucet until the water flowing from the
shower head is at the desired temperature. This method keeps the pressure
water pump running, eliminating widely fluctuating water temperatures.
4.2.3.3 Transom Hand Shower
The optional transom hand shower enables you and your guests to rinse
off with warm, fresh water after swimming without having to enter the
cabin. The hand shower is especially useful if you operate your boat in
salt water.
The hand shower is an integral part of your boat’s fresh water system.
Simply turn on the faucets and adjust them for the desired water tem-
perature. The hand shower and its faucets are located in the cockpit in
the port aft locker.
4.2.3.4 Fresh Water Washdowns
The optional bow and transom fresh water washdowns enable you to
use water from the fresh water tank to washdown and clean your
boat. Fresh water washdown is especially useful if you operate your
boat in salt water.
To use the fresh water washdowns:
1. Locate the bow- and transom-mounted hose fittings. The bow-
mounted fitting is located on the starboard bow. The transom-
mounted fitting is located in the cockpit in the port aft locker.
2. Attach one end of an appropriately sized garden hose to the hose
fitting you wish to use.
3. Attach a nozzle to the other end of the hose. The best type of nozzle
to use is the “pistol grip” type that can be opened and closed by
squeezing your hand.