Carver 38 super sport, Руководство пользователя

Страница: 86 / 162

I
NTERNAL
S
YSTEMS
3827 10/04
S
ECTION
4
To operate the bilge pumps manually, press the Forward, Mid and Aft
Bilge Pump switches, located at the helm, to their up position. This
activates the three bilge pumps.
4.4.2 Hull Drain
Your boat is equipped with one hull drain. The drain allows water to
drain from the bilges while the boat is in dry storage. The boat and cradle
should be positioned to allow water to flow toward the hull drain. The
drain is located in the transom in the deepest portion of the hull’s “V.”
Make sure the hull drain plug is securely screwed into the hull drain
before launching the boat.
A T
IP
F
ROM
C
ARVER
!
Coat the threads of the hull drain plug with waterproof grease before you install
the plug into the hull drain fitting. This makes it easier to remove the plug at a
later date.
4.5 Sanitation System
Your boat’s sanitation system includes the head, waste tank, and the
optional overboard waste discharge system. When properly used, this
system conforms to all United States antipollution laws.
4.5.1 Toilet
The toilet uses fresh water and vacuum pressure to remove waste from
the head. If you have guests who are unfamiliar with marine sanitation
systems, instruct them on how to properly use the toilet. Refer to the
OEM information for details on operating the toilet.
To operate the vacuum flush system:
1. Turn the “house” battery master disconnect switch to the “ON”
position.
2. On the Safety Breaker Panel, switch the Electric Head circuit
breaker “ON.”
3. Check the waste monitor system display located inside the lower
cabinet across from the toilet. If the Full indicator is lit, the waste
tank is full and must be emptied before you can flush the toilet. If
the Empty, Low or Mid indicator is lit, proceed to step 4.