Carver 38 super sport, Руководство пользователя

Страница: 141 / 162

3827 8/04
W
INTERIZATION AND
S
TORAGE
S
ECTION
8
to 9.7.3 Thru-Hull Fittings for the exact location of the overboard
discharge fitting.
4. Open the overboard discharge seacock.
5. Turn the “house” battery bank master disconnect switch to the “ON”
position.
6. On the DC Control Center, switch the DC Main circuit breaker
“ON,” then switch the Forward Waste Pump circuit breaker “ON.”
7. Turn the overboard discharge pump switch “ON.”
8. When a steady stream of antifreeze flows from the overboard dis-
charge fitting, turn the overboard discharge pump switch “OFF.”
9. Close the overboard discharge seacock.
10. On the DC Control Center, switch the Forward Waste Pump circuit
breaker “OFF.”
11. When you remove your boat from storage and prepare to use it again:
a. Pour 5 gallons of fresh water through the toilet.
b. Empty the waste tank as described in 4.5.2 Emptying the Waste
Tank.
c. Charge the waste tank by adding deodorizer. Use the brand of
deodorizer recommended by your Carver Dealer.
8.3.8 Grey Water Holding System
Before performing this procedure on the optional grey water holding
system, your boat should be pulled from the water. Winterize the grey
water holding system only after you have winterized the fresh water
system.
Refer to 4.6 Grey Water Holding System for a description of your
boat’s grey water holding system.
There are two types of grey water holding systems: the standard system
and the overboard discharge system.
8.3.8.1 Standard Grey Water Tank System
1. Empty the grey water tank as described in 4.6 Grey Water Holding
System. Remove as much of the fresh water used in flushing the
tank as possible.
Open Closed