Warning
IMPORTANT SAFETY INSTRUCTIONS
Read the manual and follow the instructions relating to safety tips, correct
and complete product assembly, setting into service, use and maintenance.
For your own safety, always heed the advice and warnings in these
instructions. Non-compliance with these operating instructions may expose
you to serious danger or death. Only use the product in the places and
conditions for which it is intended.
User should realize and understand these risks. The use of this product
implies the respect of the safety instructions described in the manual.
Do not use this product if you are under the influence of alcohol, drugs or medications.
Life saving devices such as life jackets and buoys should be pre-inspected and used at all times.
Use the product near the shore and beware of natural factors such as wind, tidewaters and tidal waves.
BE
AWARE OF OFFSHORE WINDS AND CURRENTS
.
NO DIVING.
Before every use, carefully inspect the product for signs of wear or leakage to ensure everything is in good
condition.
Beware of potential harmful effects of liquids such as battery acid, oil and petrol. These liquids may damage
the product.
Stay balanced. Uneven distribution of loads on the board may cause the board to overturn which could lead to
drowning.
SAVE THESE INSTRUCTIONS
Technical Specifications
303021193334
1
Installation
1. Spread out the platform on level ground.
2. Use your platform at first time or after long period storage, check the air valve and tighten the valve with the provided wrench
first. (Fig. 1).
Attention:
Don't adjust the air valve when the platform is in use.
Warning:
Don't rotate the wrench counterclockwise when inspect the inflation, or it will be danger.
3. Inflate the platform by unscrewing the cap of the air valve (Fig.2 Pos.1). Ensure that the inner spring valve is not depressed. If
it is depressed(Fig.2 Pos. 2), press the spring valve and turn counter clockwise so the inner spring valve is in the correct
position (Fig.2 Pos. 3). Inflate the platform to 0.69bar (10psi). After inflation, screw the cap of air valve (Fig.2 Pos. 4)
NOTE:
If over-inflation occurs, press the spring valve to release air to an acceptable level and securely fasten the air valve.
NOTE:
If the platform is not in use and exposed under the sun, it may cause overexpansion and damage the platform. Check
the pressure and deflate slightly until the correct pressure is obtained.
QUESTIONS? PROBLEMS?
MISSING PARTS?
For FAQ, Manuals, Videos Or
Spare Parts, Please Visit
www.bestwaycorp.com/support
TO THE STORE
Owner’s manual
Item
Inflated Size
Recommended
Working pressure
Maximum Load Capacity
65311E/65314E
15ft. x 5ft. x 6in. / 4.57m x 1.52m x 15cm
0.69 bar (10 PSI)
475 kg (1047 lb)
#65311E/65314E
003
005
006
007
002
001
004
Part No.
Description
QTY SPARE PART NO.
(#65311E/65314E)
001
002
003
004
005
006
007
P00102
F6H189
/
F3269
P6H971
P5660/P5661
P00106
Platform
Wrench
Polyester 3-ply patch
Bag
Air Valve
Repair Kit
Anchor Bags
1
1
1
1
1
1
2
303021193334_14x21cm_#65311E; #65314E
