1
1.2
1.4
1.3
INSTALLING THE PROWLER BIG GAME™ RUDDER
Parts Included:
Steering Parts: Foot Rail Parts:
Rudder Parts:
Retraction Parts:
4 Rubber
2 Rail Assemblies
4 10-32x ½” screws
1 Rudder Retraction
Grommets
(includes steering
Rudder Bracket
Line (Deploy Line)
2 Lengths of
cable)
Rudder Blade
1 Bungee
Tubing
4 10-32x½” screws
Rudder Body Kit:
1 Clam Cleat
2 Oval Copper
4 washers
1 Assembly of
4 10-32x1/2” screws
Crimps
Screw/Nut/Washer/
4 10-32 Nylok nuts
2 1” pieces black
Bushing (large)
2 Strapeye
shrink tube
1 Assembly of
2 Blind Rivets
Screw/Nut/Washer/
Misc
Roller Guide (small)
1 paper template
Rudder Body
8 Riviets
1 Round, Black Plastic Disk
Tools Needed:
Drill
4” Hole saw
Hot Glue Gun
3/8” Wrench
13/64” Drill Bit
Lighter
Soapy Water (as lubricant)
Knife or Scissors
3/8” Drill Bit
Crimper or Pliers
#2 Phillips Head Screwdriver
Tape
Rivet Gun
Wire Cutter
7/16” Wrench
Safety Goggles
Long Strip of Wire, 3 to 4 feet (ex: straightened coat hanger)
Please read the instructions thoroughly before installing the Prowler Big Game™ Rudder.
If you have questions, do not hesitate to contact Ocean Kayak (800-8-KAYAKS or
[email protected]) or your nearest Ocean Kayak dealer for more information.
1_Cutting Rear Access Hole:
1. Center the paper template on the
circular flat
surface at the rear of the tank well.
Tape in
place. Mark all nine holes with a pen.
Remove
template. See 1.1.
2. Using 13/64”
drill bit, drill all holes. See 1.2
3. Using 4” hole
saw, cut a hole using the drilled center
hole as a guide. See 1.3 & 1.4.
1.1
