![background image](http://html1.mh-extra.com/html/carrier/vvt-bypass-ii/vvt-bypass-ii_installation-and-startup-manual_2562527016.webp)
Installing the VVT Bypass II
VVT Bypass II Controller
CARRIER CORPORATION ©2019
Installation and Start-up Guide
All rights reserved
12
11
Connect the controller's
Low
connector to open space for plenum return or to a room space if using ducted
return.
Wiring the VVT Bypass II for power
WARNING
Do not apply line voltage (mains voltage) to the controller's ports and terminals.
CAUTIONS
•
The VVT Bypass II is powered by a Class 2 power source. Take appropriate isolation measures when mounting
it in a control panel where non-Class 2 circuits are present.
•
Carrier controllers can share a power supply as long as you:
•
Maintain the same polarity.
•
Use the power supply only for Carrier controllers.
Содержание VVT Bypass II
Страница 51: ......