Carrier TruVu VAVB3-E2 Скачать руководство пользователя страница 84

Страница: 84 / 155

Adjusting the TV-VAVB3-E2 driver properties

TruVu™ VAVB3

-E2

Installation and Start-up Guide

Ack Required for Off-Normal,
Fault, and Normal

Specifies whether alarms associated with this Notification Class require a BACnet
Acknowledgment for Off-Normal, Fault, or Normal alarms.

TIP

You can require operator acknowledgment for an Alarm or Return-to-

normal message (stored in the i-Vu® database). In the i-Vu® interface on the

Alarm

Enable/Disable

tab, change the acknowledgment settings for an alarm

source or an alarm category.

Recipient List

Recipients

The first row in this list is from the i-Vu® application. Do not delete this row. Click

Add

if you want other BACnet devices to receive alarms associated with this

Notification Class.

NOTE

Additional entries in this table may be lost after a download.

Recipient Description

Name that appears in the

Recipients

table.

Recipient Type

Use

Address

(static binding) for either of the following:

•

Third-party BACnet device recipients that do not support dynamic binding

•

When you want alarms to be broadcast (you must uncheck

Issue Confirmed

Notifications

). This use is rare.

Days and times

The days and times during which the recipient will receive alarms.

Recipient Device Object
Identifier

Type the

Device Instance

from SiteBuilder (or from the network administrator for

third-party devices) in the

field.

Process Identifier

Change for third-party devices that use a BACnet Process Identifier other than 1.
The i-Vu® application processes alarms for any 32-bit Process Identifier.

Issue Confirmed
Notifications

Select to have a device continue sending an alarm message until it receives
delivery confirmation from the recipient.

Transitions to Send

Uncheck the types of alarms you do not want the recipient to get.

Calendars

Calendars are provided in the driver for BACnet compatibility only. Instead, use the

Schedules

feature in the i-Vu®

interface.

Содержание TruVu VAVB3-E2



























































































































































Результаты поиска

Содержание TruVu VAVB3-E2

Отзывы:

Похожие инструкции для TruVu VAVB3-E2

Бренды по названию

Популярные бренды

Carrier TruVu VAVB3-E2, Руководство по установке и запуску

Результаты поиска

Содержание TruVu VAVB3-E2

Отзывы:

Похожие инструкции для TruVu VAVB3-E2

Бренды по названию

Популярные бренды