Carrier 40RC003603, Руководство пользователя

Страница: 6 / 19

6
Operation section
Select a desired operation by pushing each button.
FILTER RESET
LOUVER FAN
TEMP. MODE MONITOR/SET ALL/ZONE ZONE UNIT ON CENTER/LOCKED CHECK
ZONE SET/ENTER SELECT OFF TIMER ON
Sets and enters the zone.
ZONE SET/ENTER
Selects “MONITOR” or “SET”
mode.
MONITOR/SET button
Selects Last-push priority/Center/Locked.
Last-push priority/Center/Locked button
Selects that start/stop/every
set up operations are
performed for all units, zone,
or individual unit.
ALL/ZONE/UNIT button
Discharge louver
automatically operates while
the air conditioner is under
operation.
LOUVER button
Used in servicing. Do not
operate this button in normal
time.
For symptom check, the
Code No. can be observed.
(For details, see p.18.)
CHECK button
Resets (Erases) “FILTER”
indication.
FILTER RESET button
Selects the desired operation
mode.
MODE button
Adjusts the room temperature.
Adjust the temperature to the
desired set temperature by
pushing . (18 to 29˚C)
TEMP. button
Selects the desired fan mode.
FAN button
Selects unit No. to be
entered in the zone.
SELECT button
Validates the weekly timer or
timer on the market.
TIMER ON button
Indicates the desired zone No.
The desired zone No. is
indicated by pushing .
ZONE No. button
Indicates the desired unit No.
The desired unit No. is
indicated by pushing .
UNIT No. button
Starts/Stops the air conditioner.
ON/OFF button