Carrier 40RC003603, Руководство пользователя

Страница: 9 / 19

9
Operation
Setting to the operation mode (MODE, FAN, TEMP., etc.), the operation handling mode (Last-push priority/CENTER/
LOCKED), timer link, and louver operation can be set for individual unit, for a zone, or for all units.
Individual setting
[Example] When Unit No. 1 to 17, 32, 33, 48, 49, 64 air conditioners are connected, start (or stop) Unit No.64 air condi-
tioner.
1
Selection of MONITOR/SET
Push “MONITOR/SET” button to match to
“SET”. “MONITOR” indication goes off and
“SET” indication flashes.
2
Selection of UNIT No.
Push “UNIT” button to match to UNIT No. to be
set.
3
Selection of Last-push priority/CENTER/LOCKED
Push “CENTER/LOCKED” button to match
indication to “No indication (Last-push prior-
ity)”, “CENTER” or “LOCKED”.
(NOTE) Every pushing the button, indication
changes in the following order.
FILTER RESET
49 64
33 48
17 32
1
SET
CENTER ON
MODE
COOL
ON
UNIT
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
FAN
AUTO
TEMP.
˚C
LOUVER
LOUVER FAN
TEMP. MODE MONITOR/SET ALL/ZONE ZONE UNIT ON CENTER/LOCKED CHECK
ZONE SET/ENTER SELECT OFF TIMER ON
FILTER RESET
49 64
33 48
17 32
1
SET
CENTER ON
MODE
COOL
ON
UNIT
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
FAN
AUTO
TEMP.
˚C
LOUVER
LOUVER FAN
TEMP. MODE
MONITOR/SET ALL/ZONE ZONE UNIT ON CENTER/LOCKED CHECK
ZONE SET/ENTER SELECT OFF TIMER ON
4
5
4 4 4
2
3 1
4
SET
Match MODE, FAN, TEMP., LOUVER, etc.
(For details, see pages 15 to 16.)
5
ON/OFF
ON Push “ON” button.
“ON” indication goes on.
OFF Push “OFF” button.
“OFF” indication goes on.
No indication
Last-push
priority
CENTER LOCKED
( )
• Indication example (In case of Unit No. 64)
Not connected
No indication
Connected
(During OFF status)
64
Connected
(During ON status)
64
END
Selection of MONITOR/SET
Push “MONITOR/SET” button again to match to “MONITOR”.
“SET” indication goes off, and “MONITOR” indication goes on.
• Indication returns automatically to “MONITOR” after 15 seconds even if END step is not executed, and
setting operation completes.
• In setting ON/OFF only of the air conditioner, operation in steps
3
and
4
is unnecessary.