Carrier 40RC003603, Руководство пользователя

Страница: 10 / 19

10
Collective setting in a zone
All the indoor units entered in a zone can be started/stopped with the same set up contents.
[Example] Start (or Stop) the Zone No.1 (Unit No. 1 to 5 are set.) air conditioner.
1
Selection of MONITOR/SET
Push “MONITOR/SET” button to match to
“SET”. “MONITOR” indication goes off and
“SET” indication flashes.
2
Selection of ALL/ZONE/UNIT
Push “ALL/ZONE” button to match to “ZONE”.
(NOTE) Every pushing the button, indication
changes in the following order.
FILTER RESET
1
SET
ZONE CENTER
TIMER OFF
MODE
COOL
ON
2 3 4 5
FAN
AUTO
TEMP.
˚C
LOUVER
LOUVER FAN
TEMP. MODE
MONITOR/SET ALL/ZONE ZONE UNIT ON CENTER/LOCKED CHECK
ZONE SET/ENTER SELECT OFF TIMER ON
FILTER RESET
1
SET
ZONE CENTER
TIMER OFF
MODE
COOL
ON
2 3 4 5 FAN
AUTO
TEMP.
˚C
LOUVER
LOUVER FAN
TEMP. MODE MONITOR/SET ALL/ZONE ZONE UNIT ON CENTER/LOCKED CHECK
ZONE SET/ENTER SELECT OFF TIMER ON
5
6
5 5 5
3
4 1 2
ALL ZONE UNIT
No indication
Last-push
priority
CENTER LOCKED
( )
3
Selection of ZONE No.
Push “ZONE” button to match to ZONE No. to
be set.
Unit No. entered in the indicated zone is indi-
cated in the Operation monitor indication part.
Indication of each setting such as MODE
indicates the setting status of the smallest Unit
No. in the zone.
4
Selection of Last-push priority/CENTER/
LOCKED
Push “CENTER/LOCKED” button to match
indication to “Last-push priority”, “CENTER” or
“LOCKED”.
(NOTE) Every pushing the button, indication
changes in the following order.
5
SET
Match MODE, FAN, TEMP., LOUVER, etc. (For details, see pages 15 to 16.)
6
ON/OFF
ON Push “ON” button. “ON” indication goes on.
OFF Push “OFF” button. “OFF” indication goes on.
END
Selection of MONITOR/SET
Push “MONITOR/SET” button again to match to “MONITOR”.
“SET” indication goes off, and “MONITOR” indication goes on.
• Indication returns automatically to “MONITOR” after 15 seconds even if END step is not executed, and
setting operation completes.
• In setting ON/OFF only of the air conditioner, operation in steps
4
and
5
is unnecessary.
In this case, operation in p. 13 is convenient.