12
Collective setting
All the connected indoor units can be started/stopped with the same set up contents.
1
Selection of MONITOR/SET
Push “MONITOR/SET” button to match to
“SET”. “MONITOR” indication goes off and
“SET” indication flashes.
2
Selection of ALL/ZONE/UNIT
Push “ALL/ZONE” button to match to “ALL”.
“ALL” indication goes on, and “UNIT” and “No.”
indications go off.
(NOTE) Every pushing the button, indication
changes in the following order.
3
Selection of Last-push priority/CENTER/LOCKED
Push “CENTER/LOCKED” button to match indica-
tion to “No indication (Last-push priority)”,
“CENTER” or “LOCKED”.
(NOTE) Every pushing the button, indication
changes in the following order.
4
SET
Match MODE, FAN, TEMP., LOUVER, etc.
(For details, see pages 15 to 16.)
5
ON/OFF
ON
Push “ON” button.
“ON” indication goes on.
OFF
Push “OFF” button.
“OFF” indication goes on.
END
Selection of MONITOR/SET
Push “MONITOR/SET” button again to match to “MONITOR”.
“SET” indication goes off, and “MONITOR” indication goes on.
• Indication returns automatically to “MONITOR” after 15 seconds even if END step is not executed, and
setting operation completes.
• In setting ON/OFF only of the air conditioner, operation in steps
3
and
4
is unnecessary.
In this case, operation in p. 13 is convenient.
FILTER RESET
49
64
33
48
17
32
1
SET
ALL
CENTER
TIMER
ON
MODE
COOL
ON
UNIT
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
FAN
AUTO
TEMP.
˚C
LOUVER
LOUVER
FAN
TEMP.
MODE
UNIT
MONITOR/SET ALL/ZONE
ZONE
UNIT
ON CENTER/LOCKED
CHECK
ZONE SET/ENTER SELECT
OFF
TIMER ON
FILTER RESET
49
64
33
48
17
32
1
SET
ALL
CENTER
TIMER
ON
MODE
COOL
ON
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
FAN
AUTO
TEMP.
˚C
LOUVER
LOUVER
FAN
TEMP.
MODE
MONITOR/SET ALL/ZONE
ZONE
UNIT
ON CENTER/LOCKED
CHECK
ZONE SET/ENTER SELECT
OFF
TIMER ON
4
5
4
4 4
2
3
1
ALL
ZONE
UNIT
No indication
Last-push
priority
CENTER
LOCKED
( )
