
MN702GE 060320
– 24 –
8. Maintenance and service procedures
(continued)
Annual start-up and service
This burner must be started and serviced at least annually by
a qualified service technician. Failure to properly maintain and
service the burner could result in severe personal injury, death
or substantial property damage.
❏
Discuss burner/appliance operation with user to determine any problems
that may have occurred during the previous season and to verify user is
aware of proper operation and care of the burner/appliance.
❏
Review proper operation of the appliance/burner unit with the user.
❏
Turn off power to appliance.
❏
Remove combustion head assembly to clean and adjust if necessary.
(See above.)
❏
If the inside surface of the air tube and/or retention ring need to be
cleaned, clean them with a vacuum cleaner with brush attachment while
the combustion head assembly is out of the burner.
❏
Close the housing cover plate and secure in place.
❏
Perform the complete checkout procedures of pages 16, including system
inspection and checks.
❏
Inform the user of any problems found.