Carl Goldberg Products EXTRA 300, Инструкция по эксплуатации

Страница: 21 / 44

21
■ ■
Slide the pushrod assembly through the openings in
the wing ribs from Rib #6 toward the center.
■ ■
Install the hardware to mount the bellcrank to the
platform.
25.
■ ■
Using the plan for reference, cut the aileron pushrod
exit holes in the T.E. sheeting.
26.
■ ■
Make to pushrods to fit the template shown here.
27.
■ ■
Install the threaded pushrods onto the bellcranks and
secure with a snap-nut. Place a drop of JET glue onto
the snap nuts.
■ ■
Referring to the plan, fix the bellcranks in the neutral
position with a “T” pin.
28.
■ ■
Assemble the aileron coupler.