Carl Goldberg Products EXTRA 300, Инструкция по эксплуатации

Страница: 17 / 44

17
11.
■ ■
Position a full sheet edge against the L.E. shoulder.
Align the corner with the L.E. centerline end and roll
onto spar.
■ ■
Mark the sheet in line with the top spar end and cut
along the line formed. Use this sheet as a template to
cut the other three L. E. sheets.
12.
■ ■
Glue the L.E. sheeting to the L.E. shoulder, ribs, and
spar, pinning or taping to secure until dry.
■ ■
Glue the 1/16 x 2-1/2 x 36” Trailing Edge sheeting to
the notched T.E. and the wing ribs.
13.
■ ■
To glue the center sheet in place, first install the front
and back pieces. Then, slide the center piece in tightly.
Trimming may be necessary.
■ ■
Place some glue on the wing tip sheeting and slide in
place.
■ ■
Cut the 1/16 x 1/4” balsa capstrips to fit and glue to the
wing ribs.
14.
■ ■
Trim the sheeting along the wing centerline.