Carel uChiller UCHBD00001230 Скачать руководство пользователя страница 3

Страница: 3 / 108

ENG

μc0300053EN rel. 2.2 - 14.12.2021

ERAL WAR

NGS

CAREL bases the development of its products on decades of experience
in HVAC/R, on continuous investments in technological innovations to
products, procedures and strict quality processes with in-circuit and fun-
ctional testing on 100% of its products, and on the most innovative pro-
duction technology available on the market. CAREL and its subsidiaries/
aﬃ

liates nonetheless cannot guarantee that all the aspects of the product

and the software included with the product respond to the requirements
of the ﬁ nal application, despite the product being developed according
to start- of- the- art techniques. The customer (manufacturer, developer
or installer of the ﬁ nal equipment) accepts all liability and risk relating to
the conﬁ guration of the product in order to reach the expected results
in relation to the speciﬁ c ﬁ nal installation and/or equipment. CAREL may,
based on speciﬁ c agreements, act as a consultant for the successful com-
missioning of the ﬁ nal unit/application, however in no case does it accept
liability for the correct operation of the ﬁ nal equipment/system. The CAREL
product is a state-of-the-art product, whose operation is speciﬁ ed in the
technical documentation supplied with the product or can be downloa-
ded, even prior to purchase, from the website www.carel.com. Each CAREL
product, in relation to its advanced level of technology, requires setup/
conﬁ guration/programming/commissioning to be able to operate in the
best possible way for the speciﬁ c application. Failure to complete such
operations, which are required/indicated in the user manual, may cause
the ﬁ nal product to malfunction; CAREL accepts no liability in such cases.
Only qualiﬁ ed personnel may install or carry out technical service on the
product.
The customer must only use the product in the manner described in the
documentation relating to the product. In addition to observing any fur-
ther warnings described in this manual, the following warnings must be
heeded for all CAREL products:
• prevent the electronic circuits from getting wet. Rain, humidity and

all types of liquids or condensate contain corrosive minerals that may
damage the electronic circuits. In any case, the product should be used
or stored in environments that comply with the temperature and hu-
midity limits speciﬁ ed in the manual;

• do not install the device in particularly hot environments. Too high tem-

peratures may reduce the life of electronic devices, damage them and
deform or melt the plastic parts. In any case, the product should be used
or stored in environments that comply with the temperature and humi-
dity limits speciﬁ ed in the manual;

• do not attempt to open the device in any way other thandescribed in

the manual.

• do not drop, hit or shake the device, as the internal circuits and mecha-

nisms may be irreparably damaged.

• do not use corrosive chemicals, solvents or aggressive detergents to

clean the device.

• do not use the product for applications other than those speciﬁ ed in the

technical manual.

All of the above suggestions likewise apply to the controllers, serial cards,
programming keys or any other accessory in the CAREL product portfolio.
CAREL adopts a policy of continual development. Consequently, CAREL
reserves the right to make changes and improvements to any product
described in this document without prior warning. The technical speci-
ﬁ cations shown in the manual may be changed without prior warning.
The liability of CAREL in relation to its products is speciﬁ ed in the CAREL
general contract conditions, available on the website www.carel.com and/
or by speciﬁ c agreements with customers; speciﬁ cally, to the extent whe-
re allowed by applicable legislation, in no case will CAREL, its employees
or subsidiaries/aﬃ

liates be liable for any lost earnings or sales, losses of

data and information, costs of replacement goods or services, damage to
things or people, downtime or any direct, indirect, incidental, actual, puni-
tive, exemplary, special or consequential damage of any kind whatsoever,
whether contractual, extra- contractual or due to negligence, or any other
liabilities deriving from the installation, use or impossibility to use the pro-
duct, even if CAREL or its subsidiaries/aﬃ

liates are warned of the possibility

of such damage.

Fig. 1 Fig. 2

INFORMATION FOR USERS ON THE CORRECT HANDLING OF WASTE
ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)

The product is made up of metal parts and plastic parts. In reference to Eu-
ropean Union directive 2002/96/EC issued on 27 January 2003 and related
national legislation, please note that:
• WEEE cannot be disposed of as municipal waste and such waste must

be collected and disposed of separately;

• the public or private waste collection systems deﬁ ned by local legisla-

tion must be used. In addition, the equipment can be returned to the
distributor at the end of its working life when buying new equipment;

• the equipment may contain hazardous substances: the improper use or

incorrect disposal of such may have negative eﬀ ects on human health
and on the environment;

• the symbol (crossed- out wheeled bin) shown on the product or on the

packaging and on the instruction sheet indicates that the equipment
has been introduced onto the market after 13 August 2005 and that it
must be disposed of separately;

• in the event of illegal disposal of electrical and electronic waste, the pe-

nalties are speciﬁ ed by local waste disposal legislation.

Warranty on materials:

2 years (from production date, excluding consu-

mables).

Approval:

the quality and safety of CAREL S.p.A. products are guaranteed

by the ISO 9001 certiﬁ ed design and production system.

IMP

RTA

POW

GNA

CAB

ETHE

CAR

ULL

THE TE

Separate as much as possible the probe and digital input cables from
cables to inductive loads and power cables, so as to avoid possible
electromagnetic disturbance. Never run power cables (including the
electrical panel cables) and signal cables in the same conduits.

Key to the symbols:

Important:

to bring critical issues to the attention of those using the pro-

duct.

Note:

to focus attention on important topics; in particular the practical ap-

plication of the various product functions.

Important:

This product is to be integrated and/or incorporated into the

ﬁ nal apparatus or equipment. Veriﬁ cation of conformity to the laws and
technical standards in force in the country where the ﬁ nal apparatus or
equipment will be operated is the manufacturer’s responsibility. Before de-
livering the product, Carel has already completed the checks and tests
required by the relevant European directives and harmonised standards,
using a typical test setup, which however cannot be considered as repre-
senting all possible conditions of the ﬁ nal installation.

Warnings