Carel Hecu CO2, Руководство пользователя

Страница: 54 / 64

54
ENG
Hecu
C O
2
+0300085EN rel. 2.2 - 07.05.2019
Screen
index Display Description Serious
alarm
Alarm Delay Reset
ALW27 Envelope alarm Compressor operation outside of the envelope x Cag55 Auto
ALW28 High discharge gas temperature Compressor discharge temperature exceeds a
threshold set on Hb02 x Not present Auto
ALW29 Compressor low pressure diff erential
(insuffi
cient lubrication)
Diff erence between BLDC compressor
suction and discharge pressure too low x Cag55 Auto
ALW30 Inverter model not compatible
(Power+ only) Selected inverter model not compatible with the type
of compressor set on Cag02 x Not present Auto
ALW37 Alarm stores (generic) Generic alarm evaporator 1 to 5
ALW37 shows the evaporators with active alarms x Not present Auto
ALW40-53-66-
79-92 Store 1…5 offl ine Evaporator 1 to 5 confi gured by Hecu but MPXPRO/UC
device not connected via Fieldbus or offl
ine
x Not present
ALW41-54-67-
80-93 Store 1…5: Low temperature alarm Low temperature alarm for the probe set on
MPXPRO/UC evaporator 1 to 5 x from MPXPRO/
UC (Ad)
Auto
ALW42-55-68-
81-94 Store 1…5: High temperature alarm High temperature alarm for the probe set on
MPXPRO/UC evaporator 1 to 5 x from MPXPRO/
UC (Ad)
Auto
ALW43-56-69-
82-95 Store 1…5: Low temperature alarm 2 Low temperature alarm for the probe set only on MPX-
PRO evaporator 1 to 5
x from MPXPRO
(Ad2)
Auto
ALW44-57-70-
83-96 Store 1…5: High temperature alarm 2 High temperature alarm for the probe set only on
MPXPRO evaporator 1 to 5
x from MPXPRO
(Ad2)
Auto
ALW45-58-71-
84-97 Store 1…5: Defrost timeout End defrost procedure by timeout signal, evaporator
1 to 5 x from MPXPRO/
UC (dP1, dP2)
Auto
ALW46-59-72-
85-98 Store 1…5: Low superheat alarm SH evap. 1 to 5 below the threshold; control is activated
to rapidly close the valve and prevent liquid from
returning to the compressor x from MPXPRO
(P9)
Auto
ALW47-60-73-
86-99 Store 1…5:
Low suction temperature alarm Suction temperature (t_gs) 1 to 5 below threshold, with
the risk of liquid returning to the compressor x from MPXPRO
(P12)
Auto
ALW48-61-74-
87-ALZ00 Store 1…5: MOP alarm Evap. pressure in cabinet 1 to 5 above the threshold
(parameter PM1 on MPXPRO); control is activated
(parameter PM2) to rapidly close the valve x from MPXPRO
(PM3)
Auto
ALW49-62-75-
88-ALZ01 Store 1…5: LOP alarm Evap. pressure in cabinet 1 to 5 below the
threshold (parameter PL1 on MPXPRO); control is acti-
vated (parameter pL2) to rapidly open the valve x from MPXPRO
(PL3)
Auto
ALW50-63-76-
89-ALZ02 Store 1…5:
stepper driver communication error Incorrect setting of parameter P1 on MPXPRO 1 to 5,
which must be set to 2 (management of Carel E2V
electronic valve is required) x from MPXPRO
(P1)
ALW51-64-77-
90-ALZ03 Store 1…5: stepper motor error Electronic valve not properly installed x
ALW52-65-78-
91-ALZ04 Store 1…5: installation or confi g
problems on EEV driver Valve 1 to 5 end of travel alarm.
Valve blocked alarm ("Blo") signalled on MPXPRO x
ALZ06 Liquid return from MPX 1…5
offl
ine during fl ush
MPX 1 to 5 offl ine alarm during washing x
ALZ07 Warning: no DO confi gured for
vapour injection fl ow in BLDC No DO confi gured for the vapour injection function
for BLDC compressor in LT applications or for parallel
compressor, set on Fda07 x Not present Auto
ALZ08 Carel EXV valve not confi gured on
MPXPRO
The unit will switch off in 10 hours Valve managed by MPXPRO/UC is not a Carel E2V
electronic valve. x
ALP01 Power + n.2 (n.3) offl ine Parallel compressor inverter not present
or not connected x 30-90s Auto
ALP02 Power+ n2 (n.3) alarm Inverter no. 2 (no. 3) alarm n.xx
Alarm screen ALW25 indicates the type of alarm gener-
ated by the inverter x Not present Auto
ALP03 Parallel compressor start failure The diff erential between discharge (P_GC)
and suction pressure for the parallel compressor
(P_ric) does not increase by a certain value in a
period of time set on Cbg50 x Cbg50 Auto for 0 to 9
attempts