Section 4: Rescue
P
age 40
©2002 Cardiac Science, Inc.
300282-002 Rev. E0
Data in memory!
Do not push
“Resume” button
until data is down-
loaded, unless you
must do a rescue
DATA IN MEMORY
PUSH BUTTON TO
CLEAR
When all available memory sources are
full. The YELLOW “Resume” indica-
tor flashes and the phrase repeats until
you download the data and clear mem-
ory, press the “Rescue/Resume” button,
or insert an empty Rescue Data Card.
Card full! Storing
internally
CARD FULL
STORING INTER-
NALLY
When the optional Rescue Data Card,
installed in the Survivalink AED
Model 9110 or 9210, is full. The rescue
data will be stored in the internal mem-
ory of the Survivalink AED.
Remove cable to
continue rescue
REMOVE CABLE
When a serial communication cable is
connected to the Survivalink AED dur-
ing a rescue, the phrase repeats until the
cable is disconnected.
Communications
Mode
COMMUNICATIONS
MODE
When the lid is open with a serial com-
munications cable plugged into the
Survivalink AED.
Program Mode
PROGRAM MODE
One of the following:
• When you install the MDLink
Options Card before opening
the lid, and after opening the
lid you immediately hold down
the “Rescue/Resume” button
(see MDLink manual)
• When you are downloading the
rescue-event data from the
internal memory of the
Survivalink AED to a blank
Rescue Data Card (see Data
Management section)
Voice Prompt
Optional Text Display
9200/9210 Models only
When You Will Hear the Prompt
