Powerheart® AED G3 Elite 9790A and 9790E
70-02053-31 A
3-11
Getting Started
Voice Prompt
Text display
Situation
“Stop compressions”
STOP
Prompts at the end of each
COMPRESSIONS CPR round.
Note:
Prompt for traditional CPR
only, in enhanced mode.
“Give breath, give breath”
GIVE BREATH
Prompts to give two breaths
to patient.
Note:
Prompt for traditional CPR
only, in enhanced mode.
“Continue with compressions.”
CONTINUE WITH Prompts in subsequent rounds
COMPRESSIONS of the same CPR session.
Note:
This prompt is available
only in Enhanced Mode. Prompt
for traditional CPR only.
“Stop CPR”
STOP CPR
Prompts to stop CPR.
“Continue CPR”
CONTINUE CPR
Prompts during the CPR interval
enabled in the Standard prompt set.
Prompts when lid is reopened
during CPR cycle.
Table 3-6: CPR prompts (continued)
Voice Prompt
Text display
Situation
“Make sure pad connector is
CHECK CONNECTOR
Prompts when defibrillation
plugged into AED.
IS PLUGGED INTO AED pads connector is not
Press pads firmly to patient’s
PRESS PADS FIRMLY
correctly inserted into pad
bare skin.”
TO BARE SKIN
socket.
“Make sure pad connector is
CHECK CONNECTOR
Prompts when better pad
plugged into AED.
IS PLUGGED INTO AED connectivity to the patient’s
Press pads firmly to patient’s
PRESS PADS FIRMLY
skin is required because
bare skin.”
TO BARE SKIN
impedance is too high.
Table 3-7: Pad issues
