Carbatec BS-345C, Инструкция по эксплуатации

Страница: 20 / 36

FOR TECHNICAL SUPPORT CALL
1800 658 111
20
BS-345C
ADJUSTMENTS
Fig. C
Fig. G1
Fig. H1
Fig. G2
G. BLADE TENSION & TRACKING
1.
This machine features a quick-release
blade tension lever. Fig. G1 Always ensure
this is in the correct position before use
and release tension after use. There is
a blade tension indicator guide near the
quick release, which provides a measure
of reference for adequate tension by
blade width, indicated by the red line.
Overall tension (with the lever in the “under
tension” position) can be increased or
decreased by rotating the blade tension
knob on the top of the bandsaw.
2.
Blade tracking is achieved by releasing
the tracking lock knob (Fig. G1) and
turning the tracking knob incrementally,
while hand turning the bandsaw upper
wheel. This will shift the blade forward or
back on the tyre - aim for the blade to sit
centred on the tyre/wheel. Once it stays
in this location while rotating by hand,
lock this position by retightening the lock
knob. Fig. G2. CAUTION: Ensure machine
is unplugged from mains power whilst
undertaking this action!
Tracking Lock Knob
Tracking Knob
Blade Guard Lock Knob
Height Adjust Knob
H. BLADE GUARD HEIGHT
ADJUSTMENT
1.
The blade guard’s height adjustment is
rack and pinion operated. Release the
blade guard lock knob at the rear of the
machine and rotate the blade guard
adjustment knob clockwise for up, anti-
clockwise down. You should always adjust
the height of the guide to just clear the
material being cut. When set for the job at
hand, lock the guard in place with the lock
knob once again. Fig. H1