Carbatec BS-345C, Инструкция по эксплуатации

Страница: 14 / 36

FOR TECHNICAL SUPPORT CALL
1800 658 111
14
BS-345C
ASSEMBLY
A. ASSEMBLING THE STAND
1.
This stand is simple to assemble. There
are only four panels; the two legs and two
cross support panels. Fig. A1
2.
Stand the legs upright and spaced apart
so you have room to install the cross
panels. Each panel receives four M8 x 16
bolts (two each side) and corresponding
washers and nuts. Hand tighten only at
this point. Fig. A2
3.
Once you have all panels of the stand
together, ensure it is sitting flat on the
floor before tightening the bolts, taking
care to keep everything flat and aligned
as you do so. For this you will require two
10 mm spanners. Fig. A3
Fig. A1
Fig. A2
Fig. A3