WUX450 / WX520 / WUX400ST / WX450ST
User Commands
- 39 -
IMAGEFLIP
Flip display
Format
Setting
Command IMAGEFLIP=<Image
flip
setting
parameters:ID>
Response i:OK
Reference
Command GET=IMAGEFLIP
Response
g:IMAGEFLIP=<Image flip setting parameters:ID>
Note: See "Error list" for any response other than the above.
< Image flip setting parameters:ID >
Parameter
Meaning
NONE None
CEILING
Ceiling mount (upside down and right side left)
REAR
Rear (right side left)
REAR_CEILING
Rear, ceiling mount (upside down)
Environment
Power mode restriction
Input
LAN
RS-232C
SL0
SL1
SL3
ON
ST
ON
D-RGB A-RGB COMP
HDMI
LAN
USB
None
No No No Yes No Yes
Yes Yes Yes Yes Yes Yes Yes
Remarks
(1) When the display is flipped, the "keystone distortion" settings
(
HKS, VKS, 4CNR
)
are
initialized.
INPUT
Input signal selection
Format
Setting
Command INPUT=<Input
selection
parameters:ID>
Response i:OK
Reference
Command GET=INPUT
Response
g:INPUT=<Input selection parameters:ID>
Note: See "Error list" for any response other than the above.
< Image flip setting parameters:ID >
Parameter
Meaning
HDMI HDMI
D-RGB Digital
PC
A-RGB1 Analog
PC-1
A-RGB2 Analog
PC-2
COMP Component
LAN LAN
USB USB
Environment
Power mode restriction
Input
LAN
RS-232C
SL0
SL1
SL3
ON
ST
ON
D-RGB A-RGB COMP
HDMI
LAN
USB
None
No No No Yes No Yes
Yes Yes Yes Yes Yes Yes Yes