WUX450 / WX520 / WUX400ST / WX450ST
User Commands
- 49 -
DZOOM_P
DZOOM +
REP Button
press
start
DZOOM_M
DZOOM -
REP Button
press
start
VOL_P VOL
+
VOL_P+REP VOL
+
Button
press
start
VOL_M VOL
-
VOL_M+REP VOL
-
Button
press
start
MUTE MUTE
FN Fn
IMAGE IMAGE
FREEZE FREEZE
BLANK BLANK
GAMMA GAMMA
SPLIT SPLIT
ECO ECO
*-REP -
Button press ends ("2Ah," "2Dh," "52h," "45h," and
"50h" in hexadecimal form)
Remarks
(1) A parameter with '+REP' signifies "button press start". (This is the same as the status in
which the remote control button is held down.)
When executing these commands, be sure to send '*-REP' at the end to finish the button press.
The button pressing is ended in the cases below as well.
<1> When buttons on the panel or remote are operated
<2> When a command has been received
(2) When a button press request is accepted properly, "i:OK" is returned.
(without notifying the resulting execution of button operation)