WUX450 / WX520 / WUX400ST / WX450ST
User Commands
- 44 -
MEMS
Memory color adjustment (sky)
Format
Setting
Command
MEMS=<Memory color adjustment parameter:ID>
Response i:OK
Reference
Command GET=MEMS
Response
g:MEMS=<Memory color adjustment parameter:ID>
Note: See "Error list" for any response other than the above.
< Memory color adjustment parameter:ID >
Parameter
Meaning
OFF Turns
off
WEAK Weak
MIDDLE Middle
STRONG Strong
Environment
Power mode restriction
Input
LAN
RS-232C
SL0
SL1
SL3
ON
ST
ON
D-RGB A-RGB COMP
HDMI
LAN
USB
None
No No No Yes No Yes
Yes Yes Yes Yes Yes Yes Yes
Remarks
(1) This setting applies to the currently selected input signals and the image mode.
MUTE
Mute control
Format
Setting
Command
MUTE=<Mute control parameter: ID>
Response i:OK
Reference
Command GET=MUTE
Response
g:MUTE=<Mute control parameter: ID>
Note: See "Error list" for any response other than the above.
< Mute control parameter: ID >
Parameter
Meaning
ON
Disables the audio / beep sound.
OFF
Enables the audio / beep sound.
Environment
Power mode restriction
Input
LAN
RS-232C
SL0
SL1
SL3
ON
ST
ON
D-RGB A-RGB COMP
HDMI
LAN
USB
None
No No No Yes No Yes
Yes Yes Yes Yes Yes Yes Yes
Remarks
(1) Mute setting is always set to "OFF" after the projector is turned on.
Mute setting is canceled if audio volume is adjusted during mute.