WUX450 / WX520 / WUX400ST / WX450ST
User Commands
- 46 -
POWER
This controls the power supply
Format
Setting
Command POWER=<power
control
parameter:ID>
Response i:OK
Reference
Command GET=POWER
Response g:POWER=<power
mode
parameter:ID>
Note: See "Error list" for any response other than the above.
< Power control parameter:ID >
Parameter
Meaning
ON Power
ON
OFF Power
OFF
< Power mode parameter:ID >
Parameter
Meaning
OFF OFF
OFF2ON
OFF -> ON in transition
ON ON
ON2OFF
ON -> OFF in transition
Environment
Power mode restriction
Input
LAN
RS-232C
SL0
SL1
SL3
ON
ST
ON
D-RGB A-RGB COMP
HDMI
LAN
USB
None
No Yes
Yes
Yes
Yes
Yes
Yes Yes Yes Yes Yes Yes Yes
Remarks
(1) "Lamp Replacement Preparation," "Lamp Replacement Warning," and ""Air Filter Cleaning
Warning" are displayed for 10 seconds, regardless of whether the projector was started by the
button or command.
(2) Note that there are different parameters for the setting command and the reference
command.