WUX450 / WX520 / WUX400ST / WX450ST
User Commands
- 52 -
SAVEIMGPROF
User memory creation/storage/deletion -- user memory creation status
Format
Setting
Command
SAVEIMGPROF=<User memory save to parameter:ID>
Response i:OK
Reference
Command GET=SAVEIMGPROF
Response
g:SAVEIMGPROF=<Number of user memories>:<User 1 present
parameter>,<User 2 present parameter>,<User 3 present parameter>,<User 4
present parameter>,<User 5 present parameter>
'
Note: See "Error list" for any response other than the above.
< User memory save to parameter:ID >
Parameter
Meaning
USER_1
Save to User 1
USER_2
Save to User 2
USER_3
Save to User 3
USER_4
Save to User 4
USER_5
Save to User 5
DEL_ALL
Delete all User memory
< User memory presence parameter:ID >
Parameter
Meaning
0
User memory not created
1
User memory created
Environment
Power mode restriction
Input
LAN
RS-232C
SL0
SL1
SL3
ON
ST
ON
D-RGB A-RGB COMP
HDMI
LAN
USB
None
No No No Yes No Yes
Yes Yes Yes Yes Yes Yes Yes
Example
Setting
> SAVEIMGPROF=USER_2
< i:OK
Reference
> GET=SAVEIMGPROF
< g:SAVEIMGPROF=5:0,1,1,0,0
* Commands are indicated by ">", and responses are indicated by "<".