WUX450 / WX520 / WUX400ST / WX450ST
User Commands
- 57 -
7. Error List
Response
Meaning
Reaction
i:OK
The command was successfully
processed.
e:0002 INVALID_COMMAND
The command was invalid (not
defined), or the command format was
incorrect.
Use a correct command or correct command
format.
e:000A INVALID_PARAMETER
Argument (parameter) of the
command is invalid.
Use a correct argument (parameter).
e:F001 SYSTEM
An internal error occurred.
Note: If the error persists after repeatedly
resending the command with some intervals,
turn off the projector and then disconnect and
reconnect the power cord before resending the
command.
e:0005 NOT_POWER_SUPPLIED
The power is off.
Send the command while the power is on.
i:BUSY
Cannot execute as the projector is
undergoing internal processing.
Wait for a while, and resend the command.
e:1011 FUNCTION_NOT_AVAILABLE
The operation is currently invalid.
The setting cannot be made in the
current status.
Take one of the following actions:
・
Return the UI state to the usual projection
mode, and then resend the command.
・
Activate the function from the menu, and
resend the command. (Commands may be
deactivated by the related menu items.)
e:201F INVALID_SIGNAL
Cannot execute with the current input
signal.
Send the command when a different input
signal is input.