WUX450 / WX520 / WUX400ST / WX450ST
User Commands
- 12 -
Environment
This defines the environments that support the command (power supply state, input signal state).
The command is executable when the projector is in the mode indicated by "
○
" in the table of
corresponding command description page.
Power mode restriction
Input *8
LAN *1
RS-232C *6
SL0
SL1
SL3
ON
ST
ON
D-RGB A-RGB COMP
HDMI
LAN
USB
None
*2 *3 *4 *5 *7 *5 *8 *8 *8 *8 *8 *8 *8
*1 Power mode restriction/LAN
Indicates whether the command coming through LAN is executable.
*2 SL0
Standby mode, and the network function is turned off.
When the network function is turned off, the command is not executable if
coming from LAN, in which case, this should never be “O”.
*3 SL1
"O" if enabled in a power ON state.
*4 SL3
Standby mode, and the network standby setting is set to "Eco."
*5 ON
Normal projection status
*6 Power / RS-232C
Indicates whether the command coming through RS-232C is executable.
*7 ST
Standby mode (includes SL0, SL1 and SL3 altogether, regardless of the
network setting).
*8 Input
Indicates whether the command that is depending on input signal is
executable while the power is on.
Remarks
Remarks about the command is inserted when necessary.
Example
Specific example of the command is inserted when necessary.