WUX450 / WX520 / WUX400ST / WX450ST
User Commands
- 11 -
5. Guide to command description
This section explains how commands are described.
The command descriptions have the format shown below.
EXAMPLE
Summary of the function
Format
Setting
Command
A command format when a command is sent to the projector to make a setting
for the function.
"-" is shown when there is no setting command.
Example) 6AXADJ=<6-axix adjustment parameter: ID>
Response
A response format for the setting command.
"-" is shown when there is no setting command.
Example) i:OK
Reference
Command
A command format when a command is sent to the projector to refer to the
current setting, status and others for the function.
"-" is shown when there is no reference command.
Example) GET=6AXADJ
Response
A response format for a reference command.
"-" is shown when there is no reference command.
Example)
g:6AXADJ=<6-axis adjustment parameter: ID>
Note: See "Error list" for any response other than the above.
When parameters exist for the command, a list of parameter is inserted in this position.
Example)
<6-axis adjustment parameter: ID>
Parameter
Meaning
ON Valid
OFF Invalid