Canon VIXIA HF G20, Инструкция по эксплуатации

Страница: 164 / 196

Troubleshooting
164
There are no scenes with the selected rating
- No scenes have been rated yet. Rate the scenes as you like (
A
109).
- The criteria you used to select scenes by rating resulted in no applicable scenes. Change the
criteria used to select scenes by rating.
This memory card contains scenes. Delete all scenes to use relay recording.
- Save your movies (
A
127) if necessary, and delete all the movies from the memory card
(
A
92).
This photo cannot be displayed
- You may not be able to display photos taken with other devices or image files created or edited
on a computer.
This scene was recorded using another device and cannot be copied.
- Scenes that were not recorded with this camcorder cannot be copied to memory card
3
.
To record video on this memory card, it is recommended to use only the XP+/SP/LP recording
modes
- Movies may not be recorded correctly on this memory card if the recording mode is set to MXP
or FXP mode (
A
45).
To use the wireless function, insert the Eye-Fi card into slot B.
- You may have inserted the Eye-Fi card into memory card slot
2
. Insert it into memory card slot
3
.
To use this function change the camcorder's mode from
ó
to M/CINEMA
-
C
, the CUSTOM dial (
A
84) and some of the functions that can be assigned to the
assignable buttons (
A
85) cannot be used in mode. Set the mode switch to
n
(
mode) or
E
( mode) to use them.
Too many photos. Disconnect the USB cable.
- Disconnect the USB cable. Try using a memory card reader or decrease the number of photos
on the memory card to fewer than 2,500 photos (Windows), or 1,000 photos (Mac OS).
- If a dialog box appeared on the computer screen, close it. Disconnect the USB cable, and
restore the connection after a short while.
Total play time is too long
- When converting scenes from a story, the maximum total playback time of the scenes to be
converted is 12 hours (when converting individual scenes) or 2 hours and 30 minutes (when
converting stories). Reduce the number of scenes to be converted to SD.
Unable to recognize the data
- You transferred data to the camcorder recorded using a video configuration that is not
supported (PAL or SECAM). Play back the recordings with the device originally used to record
them.
Unable to recover data
- Could not recover a corrupted file. Save your recordings (
A
127) and initialize the memory
using the [Complete Initialization] option (
A
36).
Unsupported gallery data detected. Cannot record or edit. Delete gallery data?
- The gallery data of the movies in the selected memory card is not supported. The movies can
be played back but you cannot edit them or record additional scenes to this gallery. Select
[Yes] to delete the unsupported gallery data. Note that after doing so, you will not be able to
play back the movies with the device originally used to record the unsupported gallery data.
COP
Y