Canon VB-S30D MKII, Руководство по эксплуатации

Страница: 29 / 185

Making Initial Camera S ettings
29
2
Ini
tial
S
et
tings
(2) [IPv4 Address]
If you selected [IPv4 Address Setting Method] >
[Manual], enter a fixed IPv4 address.
(3) [ S ubnet Mask]
If you selected [IPv4 Address Setting Method] >
[Manual], enter the designated subnet mask values for
each network.
(4) [Enter a default gateway address] checkbox
Select this to manually set the default gateway
address.
(5) [IPv4 Default Gateway Address]
Be sure to set this if you select [IPv4 Address Setting
Method] > [Manual] and connect to the camera with a
different subnet than that of the viewer.
(6) [AutoIP]
Select this to enable or disable AutoIP.
(7) [IPv4 Address (AutoIP)]
When [Enable] is selected for [AutoIP], an
automatically set IPv4 address is displayed.
The camera will restart and the settings will take
effect.
When you click [OK], other settings in ([Password],
[Date and Time], [Camera], [Video]) [Basic Camera
Settings] will also take effect.
Set the Password, Date and Time, Camera
Name and Video
Set basic camera information, such as the camera name,
administrator password and date.
Once you have entered information for each item, click
[OK].
„
Password Setting
Click [Password] and set the administrator password.
„
Date and Time Settings
Click [Date and Time] and make settings such as the
camera date and time setting method, time zone, and
daylight saving time.
For details on each item, please refer to “Setting” (p. 44)
in “[Date and Time] Setting Date and Time”.
„
Camera Name Setting
Click [Camera] and set the camera name displayed in the
viewers and other software.
For setting details, please refer to “Camera Name” (p. 46)
in “[Camera] Setting Initial Camera Settings and External
Device Name”.
4
Click [OK].
Important
To ensure system security, be sure to change the administrator
password. Do not forget the new password.