Canon VB-C50Fi Скачать руководство пользователя страница 123

Страница: 123 / 217

4-59

VB Administration

ools

Admin Viewer

Admin Viewer is a viewer which has functions for managing the VB-C50Fi. It has special privilege

functions that the Viewer for PC and Viewer for Java do not have, such as exclusive access to

camera control functions, and external device and motion detection operation. This viewer is used

when setting view restrictions and presets.

[Special privileges of Admin Viewer]

●

Connections are also possible outside service times

(

→

P.3-14).

●

Connection time is unlimited.

●

Exclusive camera control privileges. Invalidates

control privileges held by and requests obtained

from other viewers.

●

Ignores view restrictions.

●

Operates external devices and motion detection.

●

External device input and motion detection

notification (

→

P.4-60).

●

Camera control by clicking or using dialog boxes (

→

P.4-63).

●

You can set the camera-specific features.

“Control” button

Click this button to obtain camera control privileges.

Note

About the special privileges of administrators

Since Admin Viewer has more special privileges than the Viewer for PC and Viewer

for Java, please keep in mind the following points when using Admin Viewer:

• Since connection time is unlimited, please exit the viewer after viewing.

• When camera control privileges have been obtained, Admin Viewer forcibly continues

to obtain these privileges. After viewing, be sure to exit the viewer or click the Control

button again to release these privileges.

• When making settings, keep in mind that the images outside the view restrictions

are displayed also in Viewer for PC and Viewer for Java that are connected

simultaneously with Admin Viewer.

• When making settings, keep in mind that images outside the view restrictions are

displayed also in the Viewer for PC and Viewer for Java that are connected

simultaneously with Admin Viewer.

Tip

Since most operations and settings of Admin Viewer are common with the Viewer for

PC, basic camera control and the like are omitted here. This chapter describes only

the functions and operations that are unique to Admin Viewer.

The manual for the viewer is provided on the supplied CD-ROM (Viewer-E.pdf).

Содержание VB-C50Fi


























































































































































































































Результаты поиска

Содержание VB-C50Fi

Отзывы:

Похожие инструкции для VB-C50Fi

Бренды по названию

Популярные бренды

Canon VB-C50Fi, Руководство пользователя

Результаты поиска

Содержание VB-C50Fi

Отзывы:

Похожие инструкции для VB-C50Fi

Бренды по названию

Популярные бренды