Canon Super G3 FAX Board-AS, Руководство по обслуживанию

Страница: 35 / 73

■ SSSW-SW30
Functional Construction
Bit Function 1 0
0 Not used - -
1 Not used - -
2 Not used - -
3 Not used - -
4 Not used - -
5 Switching the dial tone detection method - New detection method
6 Flow control between pages Control Do not control
7 Not used - -
Detailed Discussions of Bit 5
Switch the detection method when executing the dial tone detection at the time of calling.
0: New detection method (default)
1: Not used
Detailed Discussions of Bit 6
Select whether to execute flow control between pages.
■ SSSW-SW50
Functional Construction
Bit Function 1 0
0 Transmission number restriction: Function to prevent no external access
code *2 ON: Enable OFF: Disable
1 Transmission number restriction: Extension allowance, prohibition *2 Prohibited Allow
2 Transmission number restriction: Add "0" to the first digit of external ac-
cess code *2 Yes No
3 Operate as the client of a fax server *1 *a Yes No
4 Display the send job stop confirmation screen when pressing Stop key *2 No Yes
5 Send jobs that are targeted to stop when pressing Stop key *2 Ongoing send job Incomplete send job
6 not used - -
7 not used - -
*1: Supported by the platform version 306 or later
*2: Supported by the platform version 307 or later
*a: Enabled only for USA
Details of Bit 0
To prevent incorrectly sending fax due to forgetting to use the external access number, "0", this function displays a pop-up
warning window and prevents sending and returns to the status before pressing Start button by pressing [OK] after setting
the fax number in [Fax] or [Scan and Send] and pressing Start button if the set telephone number does not start with "00".
This function is supported even if the machine is operating in the fax server mode.
0: ON: Disable
1: OFF: Enable
5. Service Mode
30