Canon Super G3 FAX Board-AS, Руководство по обслуживанию

Страница: 51 / 73

1. From the items indicated on the screen, select the item you want to test; then, press the key on keypad that
corresponds to the DTMF signal to test.
CAUTION:
'SHORT' is not currently supported.
■ V.34 G3 Signal Transmission Test (V34G3Tx)
Select the transmission speed you want to test, and then select a modulation speed (baud rate); in response, the V.34 G3
transmission signal will be transmitted to the telephone line terminal and the speaker. To stop the operation and to end test mode,
press the
key.
<1/1> <READY>
Report Sssw Menu Num Ncu Type IP FAX Print Clear Test
<V34G3TX> <MODEM>
OK
SPEED 33600bps
3429baud
3200baud
3000baud
2800baud
2743baud
2400baud
Using Text Mode
1. Select 'SPEED', and then select the speed you want to test using the Up/Down key.
2. Select the baud rate you want to test.
Function Test
■ 4800-bps Signal Transmission Test
The DC circuit will be closed, and a 4800-bps signal will be transmitted using the 4800-bps signal transmission function of the
modem. You can also monitor the transmission signal by listening to the speaker. To stop the operation and end test mode, press
the
key.
<READY> <1/1>
Report Sssw Menu Num Ncu Type IP FAX Print Clear Test
<FACULTY> <G34800TX>
OK
G34800TX
5. Service Mode
46