Canon Super G3 FAX Board-AS, Руководство по обслуживанию

Страница: 38 / 73

Setting of Menu Switch (MENU)
Configuration of Menu Switches
<1/3> <READY>
Report Sssw Menu Num Ncu Type IPFAX Print Clear Test
OK
001
002
003
004
005
006
007
008
xxxxx
xxxxx
xxxxx
xxxxx
xxxxx
xxxxx
xxxxx
xxxxx
←
㸦
yyyyy
㸧
{aaaaa
㹼
bbbbb}
←
㸦
yyyyy
㸧
{aaaaa
㹼
bbbbb}
←
㸦
yyyyy
㸧
{aaaaa
㹼
bbbbb}
←
㸦
yyyyy
㸧
{aaaaa
㹼
bbbbb}
←
㸦
yyyyy
㸧
{aaaaa
㹼
bbbbb}
←
㸦
yyyyy
㸧
{aaaaa
㹼
bbbbb}
←
㸦
yyyyy
㸧
{aaaaa
㹼
bbbbb}
←
㸦
yyyyy
㸧
{aaaaa
㹼
bbbbb}
No. Function Scope of selection
005 NL equalizer 1: ON, 0: OFF
006 Phone line monitoring 0 to 3
007 Transmission level (ATT) 8 to 15 (ex: 15 = -15 dBm)
008 Upper limit for V.34 modulation speed 0: 3429, 1: 3200, 2: 3000, 3: 2800, 4: 2743,
5: 2400
009 Upper limit for V.34 data speed 0 to 13
010 Frequency of pseudo CI signal 0: 50 Hz, 1: 25 Hz, 2: 17 Hz
005: NL equalizer
Select ON/OFF of NL equalizer.
Select "1: ON" in the case of frequent errors caused by line status at the time of communication.
NOTE:
Error codes caused by line status at the time of transmission
##100, ##101, ##102, ##104, ##201, ##281, ##282, ##283, ##750, ##755, ##765, ##774, ##779, ##784, ##789
Error codes caused by line status at the time of reception
##103, ##107, ##114, ##201, ##790, ##793
006: Phone line monitoring
Set whether to make monitoring tone of the phone line from the speaker.
• 0 (DIAL):
To make monitoring tone of the phone line from the speaker from the start of line connection until the DIS.
• 1:
To make monitoring tone of the phone line from the speaker from the start of communication until the completion.
• 2:
Not used
• 3 (OFF):
There will be no monitoring tone of the phone line from the speaker.
007: ATT transmission level
Set the transmission level (ATT).
Increase the transmission level (make it closer to 8) in the case of frequent errors caused by line status at the time of
communication.
5. Service Mode
33