Canon Super G3 FAX Board-AS, Руководство по обслуживанию

Страница: 26 / 73

Setting of Bit Switch (SSSW)
Bit Switch Composition
The registration/setup items of the switch are set according to the positions of its 8 bits; the bit switch shown on the display is as
follows, each bit being either 0 or 1:
SW01 0 0 0 0 0 0 0 0
Bit 7
Bit 0
CAUTION:
Do not change service data identified as "not used"; they are set as initial settings.
<1/7>
<READY>
Report
Sssw Menu Num Ncu Type IP FAX Print Clear Test
0 0 0 0 0 0 0 0
1 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
1 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
1 0 0 0 0 0 0 0
SW01
SW02
SW03
SW04
SW05
SW06
0 0 0 0 0 0 0 0
1 0 0 0 0 0 0 0
SW07
SW08
OK
■ SSSW-SW01
Functional Construction
Bit Function 1 0
0 Error codes for service technician Output Do not output
1 Error dump list Output Do not output
2 Not used - -
3 Not used - -
4 Display service error codes in the ##300 series Display Do not display
5 Increase the capacity of SUBLOG for USBFAX2 Increase Do not increase
6 Not used - -
7 Cancel prohibition of user setting collectively Cancel Do not cancel
Details of Bit 0
Select whether to output service error codes.
When "Output" is selected, service error codes will be on the display and on the report.
Detailed Discussions of Bit 1
Select whether to output error dump list.
When "Output" is selected, the error transmission report and the reception result report at the time of occurrence of an error
are output with the error dump list attached.
Detailed Discussions of Bit 4
Select whether to display service error codes in the ##300 series.
5. Service Mode
21