Canon Super G3 FAX Board-AS, Руководство по обслуживанию

Страница: 20 / 73

No.*1 No.*2 T/R Description
##782 ##3782 [T] at time of ECM transmission, DCN is received after transmission of EOR-EOM.
##783 ##3783 [T] at time of ECM transmission, the procedural signal has been transmitted more than
specified after transmission of EOR-EOM, or T5 time-out (60 sec) has occurred.
##784 ##3784 [T] at time of ECM transmission, ERR is received after transmission of EOR-EOM.
##785 ##3785 [T] at time of ECM transmission, no meaningful signal is received after transmission of
EOR-EOP, causing the procedural signal to be transmitted more than specified.
##787 ##3787 [T] at time of ECM transmission, DCN is received after transmission of EOR-EOP.
##788 ##3788 [T] at time of ECM transmission, the procedural signal has been transmitted more than
specified after transmission of EOR-EOP, or T5 time-out (60 sec) has occurred.
##789 ##3789 [T] at time of ECM transmission, ERR is received after transmission of EOR-EOP.
##790 ##3790 [R] at time of ECM reception, ERR is transmitted after transmission of EOR-Q.
##791 ##3791 [T/R] while ECM mode procedure is under way, a signal other than a meaningful signal is
received.
##792 ##3792 [R] at time of ECM reception, PPS-NULL cannot be detected over partial page processing.
##793 ##3793 [R] at time of ECM reception, no effective frame is received while high-speed signal re-
ception is under way, thus causing time-out.
##794 ##3794 [T] at time of ECM reception, PPR with all 0s is received.
##795 ##3795 [T/R] a fault has occurred in code processing for communication.
##796 ##3796 [T/R] a fault has occurred in code processing for communication.
4. Error/Jam/Alarm
15