manualshive.com logo in svg

Canon PowerShot G3, Руководство по обслуживанию

Поделиться
Скачать
Canon PowerShot G3 Скачать руководство пользователя страница 176

How to print out the AF Chart-1

The large materials such as “AF Chart” that occupy a page of large size, can be divided into
several smaller pages using “Graphic Select Tool” for printing the entire page.

< AF Chart-1 >

To print, select the Legal size from the paper size setting.
Click “Print” of the Menu Bar.
Remove clicking from the check box “Fit to Page”, and then print.

< AF Chart-2 >

- Procedures -

1. Select  “ 

 Text Select Tool” from the Command Bar and keep pressing it.

Then, select the  “ 

 Graphic Select Tool”.

2. Select the desired portion to print. (Drag the cursor on desired area.)
3. Click “Print” of the Menu Bar.

Remove clicking from the check box “Fit to Page”, and then print.

4. To cancel the printing area, click an arbitrary position on the display.

* Remarks

The “AF Chart” of the Service Manual that is saved in this CD-ROM, has the colored mark-
ings in colors so that the entire page can be divided into print papers (legal-size x 2 pages).
Operate as follows.

Select “Graphic Select Tool”. Select the 2 markings having the same color to select the first
printing area. Press “Print” to print the first printing area. Perform the above steps 2 and 3.
Select another 2 markings having the second color to select the second printing area. Press
“Print” to print the second printing area. Repeat this procedure until the all pages are printed.

<AF Chart-2>

: Markings

<AF Chart-1>

Содержание PowerShot G3


























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды