manualshive.com logo in svg

Canon PowerShot G3, Руководство по обслуживанию

Поделиться
Скачать
Canon PowerShot G3 Скачать руководство пользователя страница 127

3-55

CHAPTER 3.  REPAIR INSTRUCTION

1

Click the “LCD” button.

2

1. When the message on the right appears, enter

in the text boxes the data written on the data-
sheet is attached to the JAL PCB ASS’Y. Click
the “Update” button.

2. Compare the image with that of the reference

camera. If it has a different color tint. adjust it
by repeating clicking the Yellow/Blue button
and the “Update” button alternately.

3. Click the “FINISH” button. (This ends the

“LCD” Adjustment.)

3.5.6 LCD Adjustment

■

Tools Used

• Personal Computer

• INTERFACE CABLE IFC-200PCU

• Adjustment Software

• Reference Camera (Merchandise)

• Compact Power Adapter CA-560

• Gray.jpg File

• AC Cable

• ZoomBrowser EX

■

Preparation

1. Insert the blank CF Card into the Referece Camera.
2. Connect the Reference Camera with the PC to start the ZoomBrowser EX.
3. Select “Gray.jpg” image. (in the folder of this CD-ROM, :\Adjust\Chart\Gray.jpg)
4. Click “Camera & Memory Card”.
5. Click “Upload Images”.
6. If the “Select Camera/Memory Card” window appears, select the connected camera model. Click “OK”.
7. Select “Add image after adjusting size” and “640 x 480”. Click “Add”.
8. Close the “Camera Window”.
9. Disconnect the Reference Camera from the PC, and display the “Gray.jpg” image in PLAY mode.

Содержание PowerShot G3


























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды