Canon Laser Class 810, Руководство по обслуживанию

Страница: 270 / 322

Chapter 16
16-16
16.3.11.2 Detailed Discussions of Bit 5
0011-4124
When "Detect with the new method" is selected, tone is detected for 3.5 seconds before call origination in order to discriminate between dial tone and voice. If dial
tone is detected and the time since line seizure is 3.5 seconds or longer, call origination takes place immediately. If the time since line seizure is less than 3.5 seconds,
call origination takes place after waiting for 1 second. (If the time since line seizure reaches 3.5 seconds during the 1-second waiting period, call origination takes
place immediately. By default, "Detect with a new method" is assigned for this SW.
16.3.12 SSSW-SW33
16.3.12.1 List of Functions
0017-7825
T-16-14
16.3.12.2 Detailed Discussions of Bit 0
0017-7826
Use it to specify whether B4 paper (Print) should be counted as large-size paper.
If 'yes' is selected, B4 paper will be counted as large-size paper.
If 'no' is selected, on the other hand, B4 paper will be counted as small-size paper.
16.3.12.3 Detailed Discussions of Bit 1
0017-7827
Use it to specific whether to indicate the machine serial No. on the Counter Check screen, appearing when the Counter key is pressed.
If 'yes' is selected, the serial No. will be indicated.
If 'no' is selected, on the other hand, the serial No. will not be indicated.
16.3.12.4 Detailed Discussions of Bit 2
0017-7829
Use it to specify whether B4 paper (Scan) should be counted as large-size paper.
If 'yes' is selected, B4 paper will be counted as large-size paper.
If 'no' is selected, on the other hand, B4 paper will be counted as small-size paper.
16.4 Menu Switch Settings (MENU)
16.4.1 Menu Switch Composition
0011-4137
T-16-15
Bit Function 1 0
0 count B4 (Print) as large size *1 Yes No
1 indicate serial No. on counter check screen *1 Yes No
2 count B4 (Scan) as large size *1 Yes No
3 Not used - -
4 Not used - -
5 Not used - -
6 Not used - -
7 Not used - -
*1: if equipped with soft couter functions
No. Function Range of settings
005 NL equalizer 1: ON, 0: OFF
006 telephone line monitor 0:DIAL, 1:SERVICEMAN1, 2:SERVICEMAN2, 3:OFF
007 transmission level (ATT) from 0 to 15 (ex: 15= -15 dBm)
008 V.34 modulation speed upper
limit 0:3429, 1:3200, 2:3000, 3:2800, 4:2743, 5:2400
009 V34 data speed upper limit 0:33.6 kbps, 1:31.2 kbps, 2:28.8 kbps, 3:26.4 kbps, 4:24.0 kbps,
5:21.6 kbps, 6:19.2 kbps, 7:16.8 kbps, 8:14.4 kbps, 9:12.0 kbps,
10:9.6 kbps, 11:7.2 kbps, 12:4.8 kbps, 13:2.4 kbps
010 Frequency of pseudoring signal 0:50 Hz, 1:25 Hz, 2:17 Hz