Canon Laser Class 810, Руководство по обслуживанию

Страница: 244 / 322

Chapter 15
15-2
15.2 Jam Code
15.2.1 Jam Codes (Main body)
0016-7825
T-15-2
15.2.2 Jam Codes (ADF)
0016-7826
E733 0000 Erroneous communication between controller and printer
Cannot communicate with the printer at startup. - Check the connectors of the DC controller PCB and image
processor PCB for normal connection.
- Check the power supply of the printer (Check whether
initialization is performed at startup).
- Replace the DC controller PCB or image processor PCB.
E736 0000 CCU communication error
The installed modem PCB is incompatible. - Check the connectors of the image processor PCB and modem.
- Replace the modem PCB.
- Replace the image processor PCB.
E739 0000 Erroneous communication between controller and network board
The installed network board is incompatible. - Check the connectors of the image processor PCB and network
PCB for normal connection.
- Replace the network PCB.
- Replace the image processor PCB.
E805 0000 Fan failure
The fan is faulty. - Check the fan connector.
- Replace the fan.
- Replace the DC controller PCB.
E808 0000 Fixing drive circuit failure
- The heater does not turn on.
- A fixing drive motor failure was detected. - Check the connector of the fixing film unit.
- Replace the fixing film unit.
- Replace the fixing drive motor.
- Replace the DC controller PCB.
- Replace the power supply PCB.
Code Name Sensor No. Description
0104 Pickup Delay Jam SR11 After execution of a pickup retry, the registration sensor (SR11) does not detect the leading edge of
paper within a specific period of time. Or after the duplex drive solenoid (SL1) is on, the registration
sensor (SR11) does not detect the leading edge of paper within a specific period of time.
0208 Pickup Stationary Jam SR11 After the registration sensor (SR11) has detected the leading edge of paper, the registration sensor
(SR11) does not detect the trailing edge of paper within a specific period of time.
010c Delivery Sensor Delay Jam SR5 After the registration sensor (SR11) has detected the leading edge of paper, the delivery sensor
(SR5) does not detect the leading edge of paper within a specific period of time.
0210 Delivery Sensor Stationary
Jam SR5 - The delivery sensor cannot detect absence of paper within the specified time after turning off of
the registration clutch.
- The delivery sensor cannot detect absence of paper within the specified time after the sensor
detected the leading edge of paper.
0214 Stationary jam in machine SR5, SR9 After the registration sensor (SR11) has detected the trailing edge of paper, the delivery sensor
(SR5) does not detect the trailing edge of paper within a specific period of time.
021c Wound Paper Jam at Fuser SR5, SR11 The delivery sensor (SR5) has detected absence of paper within the prescribed time after it detected
presence of paper.
1118 Door open jam SR5, SR9, SR11,
SW2 The door was opened when there was printing paper in the transport path.
Display
Code Detail Code Main Cause/Symptom Countermeasure