manualshive.com logo in svg

Canon iR2016 Series, Руководство по обслуживанию

"Canon iR2016 Series - многофункциональный принтер для офиса. Здесь вы можете скачать бесплатно инструкции по использованию. Подробное описание функций и настроек доступно для загрузки на manualshive.com. Получите мануалы и руководства по эксплуатации для вашего удобства."

Поделиться
Скачать
background image

Chapter 14

14-51

line connection terminal and speaker.

Sensor test (6-3: SENSOR)

This mode is used to verify the status of the unit sensors from the touch panel (LCD) indications.  Press numeric keypad key 3 on the FUNCTION TEST menu to

select the sensor test. The touch panel (LCD) indications change as the associated sensors turn on and off.

F-14-30

6-3:SENOR
[1] - [6]

SENSOR CHECK
0:NORMAL 1:LATCH

SWITCH CHECK
[0] - [1]

DS ON DES of HPS ON
BCVS of

Press numeric keypad key 1.

SENSOR NORMAL
[0] - [2]

Press numeric keypad key 0.

Select a sensor mode.
 0: NORMAL
 Indications change from 0 
 to 1 as the sensors turn on.
 Indications change from 1 
 to 0 as the sensors turn off.
 1: LATCH
 Indications change from 0 
 to 1 as the sensors turn on.
 Indications do not change back
 from 1 to 0 once the sensors turn
 on from the off state.

CAS:Cassette 1 paper sensor (SR204): 0/Document presence, 1/Document absence 
REG:Registration sensor (SR209): 0/Document presence, 1/Document absence
DEL 0 0:
               Fixing delivery sensor (SR202): 1/ Document presence, 0/ Document absence
               No.1 delivery sensor (SR203): 1/ Document presence, 0/ Document absence
MULTI:Manual paper sensor (SR208): 0/Document presence, 1/Document absence

SENSOR LATCH
[0] - [2]

Press numeric keypad key 1.

CAS 0000
LOCK 0

Press numeric keypad key 0.

OP1 0000

OP2 0000

OP3 0000

Press numeric keypad key 1.

CAS 0

REG 0

DEL 0 0

MULTI 0

Press numeric keypad key 0.

TONER:Waste toner full sensor (SR206): 0/Full, 1/Available
FULL:No. 1 paper full sensor (SR207): 0/Document presence, 1/Document absence 
2ND-DEL 0 0:
                      No. 2 paper full sensor  (SR1102): 0/Document presence, 1/Document absence 
                      No. 2 delivery sensor  (SR1101): 0/Document presence, 1/Document absence  

TONER 0

FULL 0

2ND-DEL 0 0

Press numeric keypad key 1.

OP1 0 0:
               Cassette 2 retry sensor (SR6): 0/Document presence, 1/Document absenc
               Cassette 2 paper sensor (SR5): 0/Document presence, 1/Document absence 
OP2 0 0:
               Cassette 3 retry sensor (SR6): 0/Document presence, 1/Document absence 
               Cassette 3 paper sensor (SR5): 0/Document presence, 1/Document absence 
OP3 0 0:
               Cassette 4 retry sensor (SR6): 0/Document presence, 1/Document absence 
               Cassette 4 paper sensor (SR5): 0/Document presence, 1/Document absence 
PATH 0 0:
                Duplex paper sensor 1 (SR1002): 0/Document presence, 1/Document absence 
                Duplex paper sensor 2 (SR1002): 0/Document presence, 1/Document absence 

OP1 0 0

OP2 0 0 

OP3 0 0

PATH 0 0

Press numeric keypad key 2

Press numeric keypad key 3

DS: ADF document sensor (P111): On/Paper presence, Of/Paper absence
DES Read sensor (P17): On/Paper presence, Of/Paper absence
HPS: CISHP sensor (P401): On/Paper presence, Of/Paper absence
BCVS: Document platen cover open/close sensor (front) (SR403): On/Cover open, Of/Cover closed

OP1: Cassette 2 size detection switch 
OP2: Cassette 3 size detection switch 
OP3: Cassette 4 size detection switch 
OPX 0000:  (X = 1, 2, 3 option cassette level)
                    Cassette size switch (PSIZE3): 1/Pressed, 0/Not pressed 
                    Cassette size switch (PSIZE4): 1/Pressed, 0/Not pressed 
                    Cassette size switch (PSIZE2): 1/Pressed, 0/Not pressed 
                    Cassette size switch (PSIZE1): 1/Pressed, 0/Not pressed

CAS 0000:Cassette 1 size detection switch 
                    Cassette size switch (PSIZE3): 1/Pressed, 0/Not pressed 
                    Cassette size switch (PSIZE4): 1/Pressed, 0/Not pressed 
                    Cassette size switch (PSIZE2): 1/Pressed, 0/Not pressed 
                    Cassette size switch (PSIZE1): 1/Pressed, 0/Not pressed
LOCK: Cover switch (SW2 and SW3): 1/Cover open, 0/Cover closed

Содержание iR2016 Series























































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для iR2016 Series

Oki ES9466 Manual preview
ES9466
Бренд: Oki Страницы: 52
Lexmark X2650 - Color Printer 3-IN-1 Specifications preview
X2650 - Color Printer 3-IN-1
Бренд: Lexmark Страницы: 2
SNBC BTP-R880NP Programming Manual preview
BTP-R880NP
Бренд: SNBC Страницы: 78
FujiFilm C 9070 9065 Quick Reference Notes preview
C 9070 9065
Бренд: FujiFilm Страницы: 34
Xerox WorkCentre XD Series User Manual preview
WorkCentre XD Series
Бренд: Xerox Страницы: 63
Aficio MP1900 Service Manual preview
MP1900
Бренд: Aficio Страницы: 188
A&D AD-8116 Instruction Manual preview
AD-8116
Бренд: A&D Страницы: 8
Xerox Phaser 6700V/DX User Manual preview
Phaser 6700V/DX
Бренд: Xerox Страницы: 162
Pantum M6503 Series User Manual preview
M6503 Series
Бренд: Pantum Страницы: 155
Kyocera Mita Ecosys FS-1800+ Installation Manual preview
Ecosys FS-1800+
Бренд: Kyocera Mita Страницы: 31
Star Micronics NX-1001 User Manual preview
NX-1001
Бренд: Star Micronics Страницы: 130
Hitachi PXR Series Brochure & Specs preview
PXR Series
Бренд: Hitachi Страницы: 11
Hitachi DDS 32 Getting Started Manual preview
DDS 32
Бренд: Hitachi Страницы: 62
Hitachi UX Basic Operation Manual preview
UX
Бренд: Hitachi Страницы: 88
Hitachi SL-1D Service Manual preview
SL-1D
Бренд: Hitachi Страницы: 165
Hitachi UX Twin Nozzle Service Manual preview
UX Twin Nozzle
Бренд: Hitachi Страницы: 355
Hitachi PXR Service Manual preview
PXR
Бренд: Hitachi Страницы: 231
Hitachi SC1 Getting Started Manual preview
SC1
Бренд: Hitachi Страницы: 22

Бренды по названию

Популярные бренды

Загрузить еще бренды