Canon iR2016 Series, Руководство по обслуживанию

Страница: 155 / 406

Chapter 4
4-15
F-4-30
4.3.6.2 CMOS Sensor Drive
0010-4259
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
The CMOS sensor used in this machine is a 1-line linear image sensor consisting of 7488 photocells. After completion of photoelectric conversion in the light-
receiving block, the signals are output to the AP circuit in the reader controller PCB in parallel for each channel (total four channels) of the CMOS sensor array.
F-4-31
4.3.6.3 CMOS Sensor Output Gain Correction and Offset Correction
0010-4260
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
The analog video signals output from the CMOS sensor are corrected so that they will have a specific gain level (gain correction), and the output voltages generated
in the absence of incident light are also corrected so that they it will have a specific offset level (offset correction).
4.3.6.4 CMOS Sensor Output A/D Conversion
0010-4261
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
After completion of the above corrections, the analog video signals are converted to digital signals corresponding to individual pixel voltage levels by the A/D
converter.
4.3.6.5 Shading Correction (Outline)
0010-4262
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
The CMOS sensor outputs are necessary even for the following reasons even when the density of the original is uniform:
(1) Variation in sensitivity among CMOS sensor pixels
(2) Variation in light intensity of rod lens array
The machine performs shading correction to even out the CMOS sensor output.
There are two types of shading correction: shading adjustment performed in the Service mode and shading correction performed for each job.
4.3.6.6 Shading Adjustment
0010-4263
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
The machine measures the density of the standard white plate, and stores the measured density data. It then processes the stored data to use it as the target value for
shading correction.
Target
value
CMOS sensor (1 line)
Analog image signal
Analog image
processing
- Gain correction
- Offset correction
A/D
conversion
CMOS sensor
drive control
CMOS sensor
control signal
Gain
correction
data
Digital
image
signal
IC1
10
Digital image
signal
8
Reader controller PCB
Contact image sensor (CIS)
J309
RAM
Shading correction
IC2
Serial
communication
I/F
CMOS sensor 1 CMOS sensor 4 CMOS sensor 3
H L L H H L H L H H L
output
Light receiving block