manualshive.com logo in svg

Canon iR2016 Series, Руководство по обслуживанию

"Canon iR2016 Series - многофункциональный принтер для офиса. Здесь вы можете скачать бесплатно инструкции по использованию. Подробное описание функций и настроек доступно для загрузки на manualshive.com. Получите мануалы и руководства по эксплуатации для вашего удобства."

Поделиться
Скачать
background image

Chapter 14

14-25

14.7.2.2 <031: Top registration adjustment (manual feed tray)>

0011-1901

iR2016J / iR2016 / iR2020 /  / iR2016i / iR2020i

Adjust the top registration margin of paper picked from a manual feed tray.  The larger the adjustment value, the wider the top margin of the image becomes.

14.7.2.3 <032: Top registration adjustment (cassette)>

0011-1902

iR2016J / iR2016 / iR2020 /  / iR2016i / iR2020i

Adjust the top registration margin of paper picked from cassettes.  The larger the adjustment value, the wider the top margin of the image becomes.

14.7.2.4 <033: Top registration adjustment (duplex unit)>

0011-1903

iR2016J / iR2016 / iR2020 /  / iR2016i / iR2020i

Adjust the top registration margin of paper picked from a duplex unit.  The larger the adjustment value, the wider the top margin of the image becomes.

14.7.2.5 <034: Left-end registration adjustment (manual feed tray)>

0011-1904

iR2016J / iR2016 / iR2020 /  / iR2016i / iR2020i

Adjust the left-end registration margin of paper picked from a manual feed tray.  The larger the adjustment value, the wider the left-end margin of the image be-

comes.

14.7.2.6 <035: Left-end registration adjustment (cassette 1)>

0011-1906

iR2016J / iR2016 / iR2020 /  / iR2016i / iR2020i

Adjust the left-end registration margin of paper picked from cassette 1.  The larger the adjustment value, the wider the left-end margin of the image becomes.

14.7.2.7 <036: Left-end registration adjustment (cassette 2)>

0011-1907

iR2016J / iR2016 / iR2020 /  / iR2016i / iR2020i

Adjust the left-end registration margin of paper picked from cassette 2.  The larger the adjustment value, the wider the left-end margin of the image becomes.

14.7.2.8 <037: Left-end registration adjustment (cassette 3)>

0011-1908

iR2016J / iR2016 / iR2020 /  / iR2016i / iR2020i

Adjust the left-end registration margin of paper picked from cassette 3.  The larger the adjustment value, the wider the left-end margin of the image becomes.

14.7.2.9 <038: Left-end registration adjustment (cassette 4)>

0011-1909

iR2016J / iR2016 / iR2020 /  / iR2016i / iR2020i

Adjust the left-end registration margin of paper picked from cassette 4.  The larger the adjustment value, the wider the left-end margin of the image becomes.

14.7.2.10 <039: Left-end registration adjustment (duplex unit)>

0011-1910

iR2016J / iR2016 / iR2020 /  / iR2016i / iR2020i

Adjust the left-end registration margin of paper picked from a duplex unit.  The larger the adjustment value, the wider the left-end margin of the image becomes.

14.7.2.11 <040: Target fixing temperature adjustment (manual feed tray)>

0011-1911

iR2016J / iR2016 / iR2020 /  / iR2016i / iR2020i

Lower the fixing temperature from the target temperature setting to reduce the chances of fixing offsets and curled or stuck delivered sheets occurring with paper

picked from a manual feed tray.

14.7.2.12 <041: Target fixing temperature adjustment (cassette 1)>

0011-1914

iR2016J / iR2016 / iR2020 /  / iR2016i / iR2020i

Lower the fixing temperature from the target temperature setting to reduce the chances of fixing offsets and curled or stuck delivered sheets occurring with paper

picked from cassette 1.

14.7.2.13 <042: Target fixing temperature adjustment (cassette 2)>

0011-1915

iR2016J / iR2016 / iR2020 /  / iR2016i / iR2020i

Lower the fixing temperature from the target temperature setting to reduce the chances of fixing offsets and curled or stuck delivered sheets occurring with paper

picked from cassette 2.

14.7.2.14 <043: Target fixing temperature adjustment (cassette 3)>

0011-1916

iR2016J / iR2016 / iR2020 /  / iR2016i / iR2020i

Lower the fixing temperature from the target temperature setting to reduce the chances of fixing offsets and curled or stuck delivered sheets occurring with paper

picked from cassette 3.

40:

Target fixing temperature adjustment (multi)

6

-30 to 0, one unit = 5 deg C

41:

Target fixing temperature adjustment (cassette 1)

6

-30 to 0, one unit = 5 deg C

42:

Target fixing temperature adjustment (cassette 2)

6

-30 to 0, one unit = 5 deg C

43:

Target fixing temperature adjustment (cassette 3)

6

-30 to 0, one unit = 5 deg C

44:

Target fixing temperature adjustment (cassette 4)

6

-30 to 0, one unit = 5 deg C

45:

Fixing film speed change (manual feed tray)

16

0 to 30, 1 unit = 0.4%

46:

Fixing film speed change (cassette)

16

0 to 30, 1 unit = 0.4%

47: - 50:

Not used

No.

Function

Default

Setting range

Содержание iR2016 Series























































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для iR2016 Series

Canon imagePROGRAF iPF760 Setup Manual preview
imagePROGRAF iPF760
Бренд: Canon Страницы: 12
Canon imagePROGRAF iPF825 MFP Basic Guide No.1 Setup Manual preview
imagePROGRAF iPF825 MFP Basic Guide No.1
Бренд: Canon Страницы: 16
Canon imagePRESS C850 Practical Manual preview
imagePRESS C850
Бренд: Canon Страницы: 146
Canon imagePRESS C850 Quick Manual preview
imagePRESS C850
Бренд: Canon Страницы: 63
Canon imagePROGRAF iPF760 Basic Manual preview
imagePROGRAF iPF760
Бренд: Canon Страницы: 132
Canon imagePROGRAF iPF825 MFP Basic Guide No.1 Technical Documents preview
imagePROGRAF iPF825 MFP Basic Guide No.1
Бренд: Canon Страницы: 8
Canon imagePROGRAF TX-2000 Introductory Information preview
imagePROGRAF TX-2000
Бренд: Canon Страницы: 14
Canon i-SENSYS MF6180dw Manual preview
i-SENSYS MF6180dw
Бренд: Canon Страницы: 1040
Canon imagePROGRAF iPF815 Basic Manual preview
imagePROGRAF iPF815
Бренд: Canon Страницы: 48
Canon imageRUNNER 1025 Manual preview
imageRUNNER 1025
Бренд: Canon Страницы: 6
Canon imageRUNNER 2230 Specification preview
imageRUNNER 2230
Бренд: Canon Страницы: 6
Canon IMAGEPRESS C7010VPS Operating Information Manual preview
IMAGEPRESS C7010VPS
Бренд: Canon Страницы: 388
Canon imagePRESS C1 Installation Procedure preview
imagePRESS C1
Бренд: Canon Страницы: 56
Canon imagePROGRAF iPF8300 Basic Manual preview
imagePROGRAF iPF8300
Бренд: Canon Страницы: 24
Canon imagePROGRAF iPF8300 Brochure preview
imagePROGRAF iPF8300
Бренд: Canon Страницы: 4
Canon imagePROGRAF iPF6350 Setup Manual preview
imagePROGRAF iPF6350
Бренд: Canon Страницы: 12
Canon imagePROGRAF iPF6350 Specifications preview
imagePROGRAF iPF6350
Бренд: Canon Страницы: 2
Canon imageCLASS MF8380Cdw Basic Operation Manual preview
imageCLASS MF8380Cdw
Бренд: Canon Страницы: 192

Бренды по названию

Популярные бренды

Загрузить еще бренды