manualshive.com logo in svg

Canon imageRUNNER ADVANCE System V3.13, Руководство по обслуживанию

Поделиться
Скачать
Canon imageRUNNER ADVANCE System V3.13 Скачать руководство пользователя страница 82

4. Turn ON the power of the host machine, and execute the following service mode to enter download mode.

• COPIER > Function > SYSTEM > DOWNLOAD

5. The following screen appears.

[ [ [ [ [ [ Wait for USB/SST Connect Menu  <v00.00> ] ] ] ] ] ] (v00.00)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  [9]  :  Version Information
  [Reset] : Start shutdown sequence

  Checking USB
  Waiting SST connection

             Do not turn OFF the power without executing the shutdown sequence.

6. Connect the USB flash drive to the USB port.

NOTE:

The USB port on the rear side of the device can also be used.

7. Once the device recognizes the USB flash drive, the following menu appears on the Control Panel.

[ [ [ [ [ [ [ [ [ [  Root Menu (USB)  <v00.00>  ] ] ] ] ] ] ] ] ]  (v00.00)

  [1] : Select Version
 
  [4] : Clear/Format
  [5] : Backup/Restore
  [8] : Download File

  [9]  :  Version Information
  [Reset] : Start shutdown sequence

            Do not turn OFF power without executing the shutdown sequence.

CAUTION:

• The machine is enabled to start normally with the previous version by the mechanism that recovers the machine at

the occurrence of an error; however, to prevent unnecessary error, do not turn OFF the power while downloading or
writing firmware.

• Be sure to execute the following procedure to quit download mode.

1. Press the [Reset] key and then the [0] key on the menu screen.

Shutdown sequence is executed.

2. Once the message on the Touch Panel has disappeared, turn OFF the main power.

NOTE:

Depending on the manufacturer or type of USB flash drive, the device may not recognize a flash drive when it is connected.
After power-on, the machine tries to detect a USB flash drive for up to 60 seconds. If the machine fails to recognize it during this
period, the menu above does not appear.
If this happens, use another USB flash drive.

■ Upgrading Firmware

You can upgrade firmware with a USB flash drive using one of the following methods:

4. Firmware Management

77

Содержание imageRUNNER ADVANCE System V3.13






















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды