Canon imageRUNNER ADVANCE System V3.13 Скачать руководство пользователя страница 142

Страница: 142 / 181

Error Code

Display

Message

Cause

Remedy

Pop-up History

N/A

An internal error occurred.

An unexpected error occurred
within the application.

Execute again.
If the error persists, refer to
"Flow of Measures to be Taken
in the Event of Trouble" and es-
calate the issue.

Error messages displayed by the Data Backup Service during scheduled backup settings

Error Code

Display

Message

Cause

Remedy

Pop-up History

N/A

Could not connect to the server.
Check Proxy Settings in Set-
tings/Registration, as well as
the other network settings for
this device.

An error occurred in the proxy
or network.

Check the following processing
to make sure that the device
can connect to Cloud.

• The device is connected

the network.

• The device is connected

the proper network envi-
ronment.

• Proper values are set in

[Settings/Registration] ->
[Network] of the device.

N/A

Could not connect because a
server error occurred.
Contact your service represen-
tative.

An error was returned from the
Data Backup Service of Cloud
after the device communicated
with it.

Execute again.
If the error persists, refer to
"Flow of Measures to be Taken
in the Event of Trouble" and es-
calate the issue.

N/A

Backup Service is unavailable.
Refer to the manual.

The terms and conditions of
Cloud have not been agreed to.

Agree to the terms and condi-
tions of Cloud and set the status
of the Data Backup Service (on
the Cloud side) to ON.

N/A

An internal error occurred.

An unexpected error occurred
within the application.

Execute again.
If the error persists, refer to
"Flow of Measures to be Taken
in the Event of Trouble" and es-
calate the issue.

N/A

Could not correctly write the
scheduled backup settings.
Configure the settings again.

Schedule setting failed.

Execute schedule setting
again.
If setup cannot be done, esca-
late the case by referring to the
"Flow of Measures to be Taken
in the Event of Trouble".

Error messages displayed by the Data Backup Service during connection check

The below messages are displayed when the [Check Connection] button is pressed in Data Backup Service touch panel.

Error Code

Display

Message

Cause

Remedy

Pop-up History

N/A

Could not connect to the server.
Check Proxy Settings in Set-
tings/Registration, as well as
the other network settings for
this device.

An error occurred in the proxy
or network.

Check the following processing
to make sure that the device
can connect to Cloud.

• The device is connected

the network.

• The device is connected

the proper network envi-
ronment.

• Proper values are set in

[Settings/Registration] ->
[Network] of the device.

7. Backup/Restoration

137

Содержание imageRUNNER ADVANCE System V3.13





















































































































































































Результаты поиска

Содержание imageRUNNER ADVANCE System V3.13

Отзывы:

Бренды по названию

Популярные бренды

Canon imageRUNNER ADVANCE System V3.13, Руководство по обслуживанию

Результаты поиска

Содержание imageRUNNER ADVANCE System V3.13

Отзывы:

Бренды по названию

Популярные бренды