Canon imageRUNNER ADVANCE System V3.13 Скачать руководство пользователя страница 154

Страница: 154 / 181

Code

Character strings

Cause

Remedy

8xxx 2046

Server certificate expired

• The root certificate regis-

tered on the device has ex-
pired.

• The root certificate regis-

tered by the user at first is
used and the correct certifi-
cate has not been regis-
tered.

• The date of the device is out-

side the validity period.

Set the correct date and time on the device.
If the date and time set on the device is cor-
rect, upgrade the version to the latest sys-
tem.

8xxx 2047

Server response time out

Remote Monitoring Server reply
time-out

If this occurs during a communication test,
wait for a while and then perform a commu-
nication test (COM-TEST) again.

8xxx 2048

Service not found

The service is not found (invalid
path).

Check that the value of Remote Monitoring
Server URL (RGW-ADR) is "https://
b01.ugwdevice.net/ugw/agentif010".

NOTE:

If it is for China, check if the URL is
as follows.
https://b01.ugwde-
vice.net.ugw2.canon.com.cn

8xxx 2052

URL error

URL setting error

Check that the value of Remote Monitoring
Server URL (RGW-ADR) is "https://
b01.ugwdevice.net/ugw/agentif010".

NOTE:

If it is for China, check if the URL is
as follows.
https://b01.ugwde-
vice.net.ugw2.canon.com.cn

8xxx 2058

Unknown error

SOAP Client failed to obtain
SOAPResponse. It may be
caused by a problem on the serv-
er side or a temporary problem in
network load, etc.

Perform and complete a communication
test (COM-TEST).

8xxx 2063

SOAP Fault

SOAP error (SOAP Fault)

Check that the value of the port number of
Remote Monitoring Server (RGW- PORT) is
443.

xxxx xxxx

Device internal error

Turn OFF and then ON the power of the de-
vice. Or, replace the system software of the
device (version upgrade).

xxxx xxxx

SUSPEND: Initialize Failure!

Internal error at startup of E-RDS Turn OFF and then ON the power of the de-

vice.

8. Monitoring Function

149

Содержание imageRUNNER ADVANCE System V3.13





















































































































































































Результаты поиска

Содержание imageRUNNER ADVANCE System V3.13

Отзывы:

Бренды по названию

Популярные бренды

Canon imageRUNNER ADVANCE System V3.13, Руководство по обслуживанию

Результаты поиска

Содержание imageRUNNER ADVANCE System V3.13

Отзывы:

Бренды по названию

Популярные бренды