Canon imageRUNNER ADVANCE 525 I, Руководство по обслуживанию

Страница: 571 / 651

Bit Function 1 0
3 To send bit 33 or later of DIS signal. Prohibit Do not prohibit
4 Record paper length to be declared by DIS signal A4/B4 size Any size
5 Not used - -
6 Not used - -
7 Not used - -
Detailed Discussions of Bit 1
Execute mm/inch conversion for the image scanned in text mode.
Detailed Discussions of Bit 3
Select whether to send bit 33 or later of DIS signal.
CAUTION:
If "Prohibit" is selected, the super-fine reception from other brand printers or memory box function will be disabled.
Detailed Discussions of Bit 4
Select whether the paper to be declared by DIS signal is a cut paper.
Select "A4/B4 size" if dividing the original at the sending machine side at the time of receiving a long original.
NOTE:
Depending on the model of sending machine, long originals may not be divided.
● SSSW-SW09
Functional Construction
Bit Function 1 0
0 Communication result at normal completion Display Do not display
1 Communication result at completion with an error Display Do not display
2 Not used - -
3 Not used - -
4 Not used - -
5 Not used - -
6 Not used - -
7 Not used - -
Detailed Discussions of Bit 0 and 1
Select whether to continue displaying the communication result on the Control Panel at normal completion and/or at
completion with an error.
● SSSW-SW12
Functional Construction
Bit Function 1 0
0 Timeout period for sending 1 page (sending) 1 0
1 Timeout period for sending 1 page (sending) 1 0
2 Timeout period for sending 1 page (HT sending) 1 0
3 Timeout period for sending 1 page (HT sending) 1 0
4 Timeout period for sending 1 page (reception) 1 0
5 Timeout period for sending 1 page (reception) 1 0
6 Not used - -
7 Page timer settings for sending/receiving Set Do not set
This machine stops communication when sending/receiving per original page takes 32 minutes or longer. When setting the timer
different from the above, see the following to set the most appropriate time length.
8. Service Mode
561