Canon imageRUNNER ADVANCE 525 I, Руководство по обслуживанию

Страница: 457 / 651

COPIER (Service mode for printer) > OPTION (Specification setting mode) > FNC-SW
CONFIG 1 Set country/area/lang/location/ppr size
Detail To set the country/region, language, location, paper size configuration for multiple system software
in HDD.
Use Case Upon user's request
Adj/Set/Operate Method 1) Select the setting item.
2) Switch with +/- key, and then press OK key.
3) Turn OFF/ON the main power switch.
Display/Adj/Set Range XX YY.ZZ.AA
XX: Country/region
JP: Japan, US: USA, GB: Great Britain, FR: France, DE: Germany, IT: Italy, AU: Australia, SG:
Singapore, NL: Netherlands, KR: Korea, CN: China, TW: Taiwan, ES: Spain, SE: Sweden, PT:
Portugal, NO: Norway, DK: Denmark, FI: Finland, PL: Poland, HU: Hungary, CZ: Czech Republic,
SI: Slovenia, GR: Greece, EE: Estonia, RU: Russia, SK: Slovakia, RO: Romania, HR: Croatia, BG:
Bulgaria, TR: Turkey, TH: Thailand, VN: Vietnam, AR: Argentina, IN: India
YY: Language (Fixed; e.g. ja: Japanese)
ZZ: Location (Fixed; e.g. 00: CANON)
AA: Paper size configuration (00: AB configuration, 01: Inch configuration, 02: A configuration, 03:
Inch/AB configuration)
Default Value It differs according to the location.
Related Service Mode COPIER> OPTION> FNC-SW> MODEL-SZ
W/SCNR 1 Setting of Reader Unit installation
Detail To set installation of the Reader Unit.
When the Reader Unit is detected at startup of the machine, "1: Installed" is set automatically.
Use Case
When installing/removing the Reader Unit
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: Not installed, 1: Installed
Default Value
0 (Printer model)/1 (Copier model)
SVMD-ENT 2 Setting of entry method to service mode
Detail To set the way to get in service mode to prevent information leak.
Use Case As needed
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: Factory default
1: [Settings/Registration] - Pressing [4] and [9] at the same time - [Settings/Registration]
Default Value 0
KSIZE-SW 2 Setting of K-size paper support
Detail To set detection/display of K-size paper (for China).
When MODEL-SZ is 0, this setting is enabled.
Use Case When using K size paper
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: Not supported, 1: Supported
Default Value
It differs according to the location.
Related Service Mode
COPIER> OPTION> FNC-SW> MODEL-SZ
Supplement/Memo
8K paper: 270 x 390 mm, 16K paper: 270 x 195 mm
8. Service Mode
447