Canon imageRUNNER ADVANCE 525 I, Руководство по обслуживанию

Страница: 513 / 651

COPIER (Service mode for printer) > OPTION (Specification setting mode) > USER
SFT-OUT 2 Setting of offset priority delivery
Detail To set whether to deliver a job where offset and collate/offset group is set to the delivery destination
with offset function.
When 0 is set, a job is delivered to the delivery destination set in [Settings/Registration] even
though the offset function is not available.
When 1 is set, a job is delivered to the delivery destination with offset function even though a
delivery destination without offset function is set in [Settings/Registration].
Use Case When preferring to deliver a job to the delivery destination with offset function
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: Based on Output Tray Settings, 1: Priority on job settings (deliver to a delivery destination where
offset is possible)
Default Value 1
Additional Functions
Mode
Function Settings> Common> Paper Output Settings> Output Tray Settings
LGCY-SCP 2 Setting of PPA/secured print switch
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to use the PPA function or the conventional secured print function.
Set 0 when using the PPA function. The conventional secured print function is disabled.
Set 1 when using the conventional secured print function (when the EFI Controller is connected,
etc.). The PPA function is disabled.
When this item is set to 0, the setting of UI-PPA becomes 1. When this item is set to 1, the setting
of UI-PPA becomes 0.
Use Case When using the conventional secured print function (when the EFI Controller is connected, etc.)
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution The PPA function cannot be used when the EFI Controller is connected.
Display/Adj/Set Range 0 to 1
0: Use the PPA function, 1: Use the conventional secured print function
Default Value 0
Related Service Mode COPIER> OPTION> DSPLY-SW> UI-PPA
Supplement/Memo PPA (Personal Print Application): A function to hold print job. It contains the function of secured
print.
CNT-PRT 2 ON/OFF of parts counter report output
Detail To set whether to print parts counter values on the counter report.
Use Case When grasping the estimated life of parts while the monitoring service function is not used
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: OFF (Not print), 1: ON (Print)
Default Value
It differs according to the location.
Additional Functions
Mode
Check Counter> Print List
8. Service Mode
503